Abstract:To study the effect of the warhead material characteristics upon warhead expansion and fracture and upon the formation of fragments under a high-power explosive charge, four different warhead materials; 30CrMnSiNi2A steel, 40CrMnSiB steel, 50SiMnVB steel and 82 steel; are examined. This paper builds a analytical modeling to theoretically analyze the expansion and fracture processes for the different material warheads. In addition, the AUTODYN-3D finite element software is used to numerically simulate the expansion and fracture processes of the four materials, and high-speed photography technology and a tinfoil target velocity test system are used to verify the simulation results. It is found that, for the "phi 62mm" aperture warhead under the explosive CL-20 charge, the expansion and fracture processes of the four materials all require similar to 60 mu s, and the shell expansion velocity in the whole process can be divided into three stages called libration, acceleration and stabilized. The initial velocities of the fragments along the warhead axis for the different warhead materials are consistent with each other, though the expansion velocity and the maximum initial velocity of the fragments are largest for the 30CrMnSiNi2A steel warhead. It is found that the warhead expansion velocity and the initial velocity of the fragments decrease gradually as the ultimate tensile strength of the warhead material decreases and as its dynamic fracture toughness increases. This study introduces the coefficient of radial warhead expansion and acquires the function for the distance of the radial warhead expansion over time, which is influenced by the warhead material characteristics. The results of this study will provide a reference for fragmenting warhead shell material selection and design.

Numerical Investigation of Different Initiation Modes for Dual-focusing Fragment Warhead

Numerical Simulation of Effect of Initiation Position on Directed Performance of Warhead Fragment

Detonation driving rules for cylindrical casings under asymmetrical multipoint initiations

Numerical simulation of the disk fragment impacting resistance of plate target

Study on Axial Dispersion Characteristics of Double-Layer Prefabricated Fragments

Investigation of the Fracture and Fragmentation of Implosively Driven Thin-Walled Cylindrical Shell: From Thermodynamic Analysis to CDEM Simulation

Effect Of Warhead Shell Thickness On Fragments' Formation And Penetration Performance

Orthogonal Optimization Design for Combined MEFP Warhead

Dynamic Multiprojectile Attack and Killing Effects of Detonation Warheads

Expansion And Fracture Of Fragmenting Warhead Shells Of Various Materials Under A Cl-20 Explosive Charge

Numerical Investigation on Effects of Ignition Energy on Two-phase Detonation Wave Formation

Research On The Rule Of Multi-Point Initiation Replacing Annulus Initiation Under Different Charge Caliber

Numerical Simulation Research On The Formation Of Mefp

Method of Evaluating Energy Released by a Warhead Charge Based on Average Fragment Quality

Experimental study on fragments dispersion characteristics of elliptical cross-section casing under explosive loading

Calculation Model of the Axial Dispersion Distribution of Cylindrical-Warhead Fragments

Functional Damage Assessment Method for Preformed Fragment Warheads to Evaluate the Effect on the Phased-Array Antenna

Research on the Effect of Inner Lining on Fragment Scattering Characteristics of Fragmentation Warhead

Numerical Simulation of Effects of Cone Angle and Thickness on the Formation of MEFP

The effect of annular multi-point initiation on the formation and penetration of an explosively formed penetrator

Axial Distribution of Fragments from the Dynamic Explosion Fragmentation of Metal Shells