Abstract:Propeller body-force model is a low-cost tool for numerical simulation of the ship self-propulsion test compared with discretized propeller model. As one of the most traditional theories of propeller model, Blade Element Momentum Theory (BEMT) has been proved to have considerable application potential with stability and accuracy. However, it's still hard for BEMT to keep accuracy in a relatively large range of working conditions due to unproved prior assumptions, which limits the application of BEMT in complex inflow conditions like ship self-propulsion. In the application of BEMT, the calculation method of Angle of Attack (AOA) has a great influence on the accuracy. In this paper, an "Agent Actuating Disk (AAD)" method is proposed to determine the AOA. AAD-BEMT method uses AAD to obtain the relationship between local velocity and inflow velocity so that the AOA can be defined by geometric Angle of Attack. This consideration avoids the inaccuracy of determining AOA by local velocity from discretized propeller flow field. The KP505 propeller open-water test is chosen to verify the accuracy of the proposed AAD-BEMT method. Then the numerical simulation of a KRISO Container Ship (KCS) self-propulsion test (Fr = 0.26) is carried out to investigate the performance of the AAD-BEMT body-force model as well as other different propeller models when dealing with non-uniform ship's wake. The open-water curve, propeller load distribution, and self-propulsion factor are presented and compared with the available experimental data. The results show that the predicted load distribution is accurate. In addition, not only the thrust and torque of the AAD-BEMT model can have a stable accuracy in a wide operating condition, but also the wake agrees well with the experimental result, which means that the proposed AAD-BEMT model can economically and accurately simulate the momentum transport of propeller under complex hull-propeller interaction condition.

Effect of Armature Position on Efficiency of Asynchronous Coil-Propeller

Improved Analytical Modeling of a Novel Ironless Linear Synchronous Machine With Asymmetrical Double-Layer Winding Topology

Electromagnetic Performance Analysis and Optimization of Asynchronous Motors Based on Finite Element Analysis

Simulation and Experiment for Linear Induction Coil Propeller

Dynamic Simulation of A Superconducting Augmented Linear Propulsion System

3-D Analytical Model of Armature Reaction Field Calculation for Ironless Axial Flux Permanent Maanet Motor

Modeling and Simulation of Marine Electric Propulsion System

Effect of Encapsulation Shell on Launching Performance of Asynchronous Coil Launcher

Modeling and the Control Strategy of the Coaxial Contra-Rotating Propeller System

Numerical Prediction of Propulsive Performance with an Iterative Body-Force Propeller Model

Dynamic Investigation of the Influence of Propeller on the Vibro-Acoustic Characteristics of Marine Propulsion Systems

Parametric Analysis for Underwater Flapping Foil Propulsor

Study on the Hydrodynamics and Kinematics of a Biomimetic Fin Propulsor Actuated by SMA Wires

Influence of Shell Structure on Exit Velocity During Asynchronous Electromagnetic Propulsion

An Improved BEMT Model Based on Agent Actuating Disk with Application to Ship Self-Propulsion Simulation

New Actuator Disk Model for Propeller-Aircraft Computation

The Hydroelastic Analysis of Marine Propellers Considering the Effect of the Shaft: Theory and Experiment

Simulation of an Integrated Electrical Ship Propulsion System Using Matlab-Simulink

Auto-pitch Wing-in-ground Effect Oscillating Foils for Marine Propulsion

Numerical Prediction of Self-Propulsion Performance with Iterative Body-Force Propeller Model

Propeller design to improve flight dynamics features and performance for coaxial compound helicopters