Abstract:Accurate prediction of the self-propulsion performance is one of the most important factors for energy-efficient design of a ship. In general, the hydrodynamic performance of a full-scale ship could be achieved by model-scale simulation or towing tank test with extrapolations. With the development of CFD methods and computing power, directly predict ship performance with full-scale CFD is an important approach. In this article, a numerical study on the full-scale self-propulsion performance with propeller operating behind ship at model- and full-scale is presented. The study includes numerical simulations using RANS method with double-model and VOF model respectively and scale effect analysis based on overall performance, local flow fields and detailed vortex identification. Verification study on grid convergence is also performed for full-scale simulation with global and local mesh refinements. And a series of sea trail tests were performed to collect reliable data for the validation of CFD predictions. The analysis of scale effect on hull-propeller interaction shows that the difference on hull boundary layer and flow separation is the main source of scale effect on ship wake. And the results of the fluctuations of propeller thrust and torque along with circulation distribution and local flow field show that propeller’s loading is significantly higher for model-scale ship. It is suggested that the difference on vortex evolution and interaction is more pronounced and have larger effects on ship’s powering performance at model-scale than full-scale according to the simulation results. From the study on self-propulsion prediction, it could be concluded that the simplification on free surface treatment does not only affect the wave-making resistance for bare hull but also the propeller performance and propeller induced ship resistance which can produced up to 5% uncertainty to the power prediction. Roughness is another important factor in full-scale simulation because it has up to approximately 7% effect on the delivery power. As a result of validation study, the numerical simulations of full-scale ship self-propulsion shows good agreement with the sea trail data especially for cases that have considered both roughness and free surface effects. This result will largely enhance our confidence to apply full-scale simulation in the prediction of ship’s self-propulsion performance in the future ship designs.

Performance Prediction of Contra-rotating Propellers for Undersea Vehicle

Locating, Trajectory Planning and Control of an Underwater Propeller Cleaning Manipulator

Effect of Relative Positions between Blade and Volute Tongue on Prediction of Performance in Simulation of Centrifugal Pump

Numerical study of the hydrodynamic performances of surface piercing propeller

Numerical Study of Hydrodynamic Performance of A High Maneuverability Ocean Engineering Ship with Pod Propeller Design

Deep Learning Based Fast Prediction and Optimization of Aerodynamic Performance for a Propeller with Gurney Flap

Design of Contra-Rotating Waterjet Pump Based on High Cavitation Performances

Spatial Fluctuating Pressure Calculation of Underwater Counter Rotating Propellers under Noncavitating Condition

Unsteady Responses and Correlation Characteristics of Propeller Blades under Turbulence Excitation

Parameterized design method and verification of propeller single-passage domain

Numerical simulation of the cavitating noise of contra-rotating propellers based on detached eddy simulation and the Ffowcs Williams–Hawkings acoustics equation

Numerical prediction of the performance of marine propellers using computational fluid dynamics simulation with transition-sensitive turbulence model

Assessments of propulsion models for free running surface ship turning circle simulations

Modeling and the Control Strategy of the Coaxial Contra-Rotating Propeller System

RANSE simulations for unmanned sailboat performance prediction: Coupling aerodynamics and hydrodynamics in self-sailing

Hybrid Aerodynamic Optimization of a Propeller Based on the Reformulated Blade Element Momentum Theory

The study of rotate speed influence on the performance of Contra-Rotation-Propeller in stratospheric airship

Computational fluid dynamics driven surrogate model to predict hydrodynamic and acoustic properties of propeller boss cap fins

Numerical Analysis of Full-scale Ship Self-Propulsion Performance with direct Comparison to Statistical Sea Trail Results

Numerical Calculation and Model Tests for Drag and Power Prediction of a Manned Submersible

Prediction of steady hydrodynamic performance of pump jet propulsor considering vessel body influence