Abstract:Even with modern smart metering systems, erroneous measurements of the real and reactive power in the power system are unavoidable. Multiple erroneous parameters and measurements may occur simultaneously in the state estimation of a bulk power system. This paper proposes a gross error reduction index (GERI)-based method as an additional module for existing state estimators in order to identify multiple erroneous parameters and measurements simultaneously. The measurements are acquired from a supervisory control and data acquisition system and mainly include voltage amplitudes, branch current amplitudes, active power flow, and reactive power flow. This method uses a structure consisting of nested two loops. First, gross errors and the GERI indexes are calculated in the inner loop. Second, the GERI indexes are compared and the maximum GERI in each inner loop is associated with the most suspicious parameter or measurement. Third, when the maximum GERI is less than a given threshold in the outer loop, its corresponding erroneous parameter or measurement is identified. Multiple measurement scans are also adopted in order to increase the redundancy of measurements and the observability of parameters. It should be noted that the proposed algorithm can be directly integrated into the Weighted Least Square estimator. Furthermore, using a faster simplified calculation technique with Givens rotations reduces the required computer memory and increases the computation speed. This method has been demonstrated in the IEEE 14-bus test system and several matpower cases. Due to its outstanding practical performance, it is now used at six provincial power control centers in the Eastern Grid of China.

Network Parameter Identification Method Considering Gross Error Reduction Index

Identification of Network Parameter and Measurement Errors Based on a Mixed Integer Quadratic Programming Model

Improvements and measurements of parameter identification for electric load

ON-LINE IDENTIFICATION OF POWER SYSTEM DYNAMIC EQUIVALENT Part Two Parameter Estimation & Simulation

Power System Network Parameter Error Identification by Lagrange Multiplier Based Method

Probabilistic Preassessment Method of Parameter Identification Accuracy with an Application to Identify the Drive Train Parameters of DFIG

Parameter identification of electric loads based on second-order sensitivity

Parameter Identification of Load Model Using Scatter Plot Based Global Sensitivity Analysis

Network Parameter Identification and Estimation Based on Hybrid Measurement of WAMS/SCADA

A Legendre Neural Network-Based Approach to Multiparameter Identification of Traffic Loads Across the Full Spatiotemporal Domain

The Parameter Identification Method of Steam Turbine Nonlinear Servo System Based on Artificial Neural Network

Analyzing the experiment strategy of testing the equivalent parameters of a one-port network based on triangular voltage measurement method

A Fast Solution for the Lagrange Multiplier-Based Electric Power Network Parameter Error Identification Model

A Practical GERI-Based Method for Identifying Multiple Erroneous Parameters and Measurements Simultaneously

An On-line Identification and Estimation System for Intelligent Dispatching Power Grid Parameters and Its Application in Guangzhou Power Grid

Online Parameter Estimation Considering Input Errors for Synchronous Generation Systems

Bayesian Network Method of Speed Estimation from Single-Loop Outputs

Identity Microscopic Parameters Calibration of Microscopic Traffic Simulation Models

Gross Error Detection and Identification Based on Parameter Estimation for Dynamic Systems

A Identification Algorithm of Freeway Steady-State Speed-Density Balance Relational Expression Based on the Power Series Expansion and the Least Squares Method

AWL-GCN: Branch Parameter Identification Considering Grid Spatial Structure Constraints