Abstract:Abstract This paper presents a novel scheme to online measure the birefringence of the sensing fiber in all‐fiber optic current transformer (AFOCT) system, which monitors the current on direct current (DC) transmission lines using the Faraday magneto‐optic effect in sensing fibers. In this scheme, by purposefully varying the difference of square‐wave modulated phases via the phase modulator in the AFOCT system, different system transmittances can be obtained. On the basis of the relationship between the system transmittance and linear and circular birefringences, an online measurement scheme of both the linear and circular birefringences of the sensing fibers can be established. In this scheme, the AFOCT system is described by the transmission model based on the Jones matrices, with which the current on DC transmission lines can be measured from the phase shift caused by the Faraday effect. Then, under different square‐wave modulated phases, the system transmittance models are constructed with respect to the linear and circular birefringences of the sensing fiber. For a given sensing fiber with certain linear and circular birefringences, the specific system transmittances are determined and are the curves in space in the respective system transmittance models. Subsequently, these curves in space can be projected onto the coordinate plane composed of the linear and circular birefringence coordinate axes, where the intersection point of the projected plane curves gives the to‐be‐measured values of the linear and circular birefringences of the sensing fiber. The proposed scheme is validated by the preset linear and circular birefringences of the sensing fiber, with different linear birefringences of the polarization‐maintaining fiber. The measurement results show the values consistent with the preset ones.

Influence Mechanism of Conductor Eccentricity on All-fiber Optic Current Transformers

Influence of Imperfect Faraday Rotation Mirror on All-Fiber Optic Current Sensor.

Simulation Analysis of Temperature Effects on All-Fiber Optic Current Sensor

Nonreciprocity in Single-Mode Fiber Coil Induced by Orthogonal Magnetic Field

Fiber Fusion Splicing Error Analysis of All-Fiber Optic Current Sensor with Different Demodulation Schemes

Theory and Compensation Method of Axial Magnetic Drift for Depolarized Fiber Optic Gyro

Theory and Compensation Method of Axial Magnetic Error Induced by Axial Magnetic Field in A Polarization-Maintaining Fiber Optic Gyro

Research on the Effect on Intensity Modulation Caused by Perpendicularity Between the Axes of Fiber Pair and Reflector

Modeling and analysis of vibration characteristics of all fiber current sensor

Error characteristic analysis of fiber optic current transformer with sine modulation

Model and Experimental Study on Optical Fiber CT Based on Terfenol-D

An impact-insensitive fiber optic current transformer based on polarization maintaining photonic crystal fiber delay coil

A novel compensation fiber coil for eliminating Sagnac Effect in fiber optic current sensor

State Influence of Adjacent Conductors Distributed Around Tested Channel in High-Speed Connector on Electromagnetic Measurement

Temperature stability analysis of the all-fiber current sensor with a loop structure

Study on Extraction of Electrical Runout in Eddy Current Measurement Using Finite Element Method

Temperature Compensation in Full Optical Fiber Current Transformer Using Signal Processing

A Fault Diagnosis System of All-Fiber Optical Current Transformer with Correlation Detection

Novel Fiber Optic Current Transformer With New Phase Modulation Method

Online measurement of birefringence of sensing fibers in the AFOCT system

A Novel Configuration for the Transducer of Magneto Strictive Fiber-Optic Interferometric Sensors