Abstract:Low and medium temperature pyrolysis technology is an important way of clean and utilization of low metamorphic coal. In this paper, three kinds of char samples were prepared in tube furnace according to different pyrolysis temperatures, and their combustion characteristics were compared by means of thermal analysis. Three modeless kinetic methods, KAS, FWO and Fredman, were used to study the combustion reaction activity under nonisothermal conditions from TG curve and DSC curve. In the end, Malek method is used to explore the mechanism function of the reaction process, and the results are analyzed numerically. The objective programming model and MATLAB are used to calculate the combined mechanism function of the reaction process. The results show that with the increase in the pyrolysis temperature, the combustion of char gradually shifts to the high temperature zone and shows a secondary effect between the volatile matter and the combustion characteristic temperature. The results show that the flammability index and burnout index increase first and then decrease, and the char prepared at 550 °C has the most developed pores and the best combustion performance with the increase in pyrolysis temperature, the average reaction activation energy decreases first and then increases, and the char prepared at 550 °C has the lowest activation energy. When the combustion heating rate is 5 °C min<sup>−1</sup>, the experimental curve and theoretical curve have a higher coincidence, and the combined mechanism function is adopted. The number is more suitable than the single most probable mechanism function to describe the combustion process of char. At this heating rate, the fuel reaction conforms to Z–L–T equation and reaction order model, which is limited by three-dimensional diffusion and chemical reaction. The distribution coefficients of the combined mechanism function are 0.4207 and 0.5886.

Accelerating Ignition and Combustion Properties of Coal Char

Kinetic study on in-situ and cooling char combustion in a two-step reaction analyzer

Experimental Analysis of Intrinsic Kinetics and Rate Profiles for Coal Char Conversion under Different Atmospheres

Combustion performance and reaction activity of coal char

Dynamic and kinetic studies on the oxy-coal combustion using multi-parameter high-speed diagnostics

Ignition Characteristic of Blended Coal in a Drop-Tube Furnace

Gas Emissions from Blends of Bituminous Coal and Biomass Chars under Different Pyrolysis Conditions

Investigations into the Ignition Behaviors of Pulverized Coals and Coal Blends in a Drop Tube Furnace Using Flame Monitoring Techniques

Experimental Study On The Comprehensive Behavior Of Combustion For Blended Coals

Study of the Kinetic Behaviour of Biomass and Coal During Oxyfuel Co-Combustion

Combustion behaviors of various coals and chars: From covalent bonds’ and radicals’ perspective

Thermal effects and kinetics behaviors of coal spontaneous combustion via synchronous thermal analyzer under different heating rates

Effect of Microstructures on Char Combustion Reactivity

Experimental research on coal/char combustion in O-2/CO2 mixed atmosphere

Combustion characteristics and thermokinetics of coconut shell, coal water slurry, and biomass

Thermal Analysis Kinetics Study of Pulverized Coal Combustion under Oxygen-Rich Atmosphere

Experimental research on ignition characteristics of pulverized coal

Optimized TGA-based experimental method for studying intrinsic kinetics of coal char oxidation under moderate or intense low-oxygen dilution oxy-fuel conditions

Numerical analysis of kinetics of char combustion process and selection of mechanism functions

Effects of CO2 and H2O on oxy-fuel combustion characteristics and structural evolutions of Zhundong coal pellet at fast heating rate

Combustion Characteristics of Char from Pyrolysis of Zhundong Sub-Bituminous Coal under O2/steam Atmosphere: Effects of Mineral Matter