Nitrogen, sulfur, chlorine containing pollutants releasing characteristics during pyrolysis and combustion of oily sludge
Guanyi Chen,Jiantao Li,Kai Li,Fawei Lin,Wangyang Tian,Lei Che,Beibei Yan,Wenchao Ma,Yingjin Song
DOI: https://doi.org/10.1016/j.fuel.2020.117772
IF: 7.4
2020-08-01
Fuel
Abstract:<p>Pyrolysis and combustion have become effective technologies for oily sludge treatment. This paper firstly investigated N/S/Cl pollutants during pyrolysis and combustion of oily sludge in detail by thermogravimetry-mass spectrum (TG-MS) and pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS). Combined with the distribution characteristics and contents of hazardous elements, the releasing routes were proposed. Three typical decomposition steps were observed: volatilization of water and little hydrocarbons below 200 °C, cracking of hydrocarbons approximately at 200–500 °C, transformation of inorganic compositions at the higher temperature. Double-direction transfer diffusion reaction model was employed with estimated apparent activation energy <em>E<sub>a</sub></em> of 41.97–66.59 kJ·mol<sup>−1</sup> for pyrolysis and 52.02–62.42 kJ·mol<sup>−1</sup> for combustion. The main pyrolytic products were alkanes and alkenes ranging from C<sub>9</sub> to C<sub>21</sub>, which had the potential to be reused as diesel fuels. Slight amounts of S/Cl-containing species were detected in liquid products. Database of inorganic and organic N/S/Cl pollutants with larger molecules was established. Organic N/S/Cl functionalities in oily sludge contributed to the majority of N/S/Cl pollutants. NH<sub>3</sub>, HCN, HNCO, NO, NO<sub>2</sub>, CS<sub>2</sub>, SO<sub>2</sub>, CH<sub>3</sub>SH, HCl, and Cl<sub>2</sub> were generated between 200 and 600 °C during pyrolysis process, which were much lower than the quantity of corresponding products from combustion. Oxygen-enriched atmosphere in combustion facilitated decomposition of organic fractions, and shifted release regions towards lower temperatures. The decomposition of amine-N functionality contributed to NH<sub>3</sub> release below 200 °C. With temperature increasing, heterocyclic-N began to decompose and release abundant NH<sub>3</sub>, small amounts of HCN and HNCO. Aliphatic-S and disulfides-S contributed to the formation of H<sub>2</sub>S, COS, and CS<sub>2</sub>.</p>
energy & fuels,engineering, chemical