Mercury Removal from Flue Gas by Metal Oxide-Loaded Attapulgite Mineral Sorbent

Fangfang Liu,Junying Zhang,Yongchun Zhao,Chuguang Zheng

DOI: https://doi.org/10.11715/rskxjs.R201403060

2014-01-01

Abstract:Attapulgite sorbent was tested in a fixed-bed reactor system to evaluate its mercury removal performance from simulated flue gas. The sorbent was modified by MnO2 and Co3O4 respectively to promote its ability of mercury removal. The characterization of the sorbent was analyzed using accelerated surface area porosity and X-ray diffrac-tion(XRD). The Hg0 concentrations were detected using VM3000 online mercury analyzer. The effect of fuel gas components was tested. The result shows that the sorbent modified by MnO2 and Co3O4 can promote mercury removal obviously from 12.2% to 87.9% and 84.1% respectively;that 4% of O2 can promote Hg0 removal efficiency to 92.1%and 88.1%,that 10×10-6 of HCl can promote Hg0 removal efficiency to 90.1% and 90.7%,that 400×10-6 of SO2may decrease Hg0 removal efficiency to 84.7% and 64.5% respectively,and that 50×10-6 of NO may decrease Hg0 removal efficiency to 86.1% and 81% respectively.