Abstract:The pilot-ignited high-pressure direct-injection (HPDI) combustion with the eccentric configuration is a practical approach to achieve high thermal efficiency and clean combustion. However, the combustion process and combustion regime still remain unclear. In this study, the effects of two key parameters "offset" (distance between concentric and eccentric injectors) and "dwell" (interval between concentric and eccentric injection timing) on the combustion process, combustion regime, and the corresponding performance are numerically investigated systematically. Results show that the interaction between the Hame kernels of pilot fuel and the plumes of main fuel determines the combustion mode of each main fuel plume, and thereby different combustion regimes in the pilot-ignited HPDI engine can be generated by controlling the offset and dwell. Specifically, under the concentric configuration or the eccentric configuration with very small offset and dwell, all the main fuel plumes are in the non-premixed mode, exhibiting a diffusion combustion (DC) regime. Under the eccentric configuration with medium offset and dwell, some of the main fuel plumes are in the non-premixed and the others in the partially premixed mode, exhibiting a special combustion regime, which is named the multi-mode co-existing combustion (MMCC) in this study. Under the eccentric configuration with large offset and dwell, all the main fuel plumes are in the partially premixed mode, exhibiting a partially premixed combustion (PPC) regime. Among the three combustion regimes, the diffusion combustion regime exhibits the lowest ISFC and unburned HC emission but high NOx and soot emissions. The ISFC of the partially premixed combustion regime is almost double that of the other two regimes which is far from being acceptable. The MMCC regime shows a better comprehensive performance: achieving much lower ringing intensity and soot emission with almost the same ISFC compared to the diffusion combustion regime. In summary, the pilot-ignited HPDI combustion with the eccentric configuration can potentially achieve high fuel economy with low emissions, under the premise of the ratio of non-premixed and partially premixed combustion modes in the MMCC regime is well controlled.

Numerical Simulation of Different Gasoline/Diesel Dual-Fuel HPCC Combustion Modes

Numerical Investigation of Diesel Spray Combustion Characteristics in the Ammonia/air Atmosphere

Sequenced Combustion Characteristics, Emission and Thermal Efficiency in Gasoline Homogeneous Charge Induced Ignition

Numerical investigation of the effect of injection timing on the gasoline?diesel dual?fuel combustion

Numerical Investigation of the Combustion Regime in Pilot-Ignited High-Pressure Direct-Injection Low Reactivity Fuel Combustion with the Injection System of Eccentric Configuration

Numerical resolution of multiple premixed compression ignition (MPCI) mode and partially premixed compression ignition (PPCI) mode for low octane gasoline

Performance and Emissions of Gasoline Homogeneous Charge Induced Ignition (HCII) by Diesel Through Whole Operating Range on a Heavy-Duty Multi-Cylinder Engine

A Visual Study on of HCB/Gasoline Dual-Fuel Combustion Strategy and Premix Ratio in a Diesel Engine

A computational study of direct injection gasoline HCCI engine with secondary injection

Visualization and Performance Analysis of Gasoline Homogeneous Charge Induced Ignition by Diesel

Temporally and Spatially Distributed Combustion in Low-Octane Gasoline Multiple Premixed Compression Ignition Mode

3D Numerical Simulation for Gasoline HCCI Engine with Two-Stage Injection Based on Parallel Computation

Combustion and Emission Characteristics of Multiple Premixed Compression Ignition (MPCI) Mode with Low Octane Gasoline Fuels

Numerical Simulation of Gasoline Stratified Charge Compression Ignition Using 3D-CFD Coupled with Detailed Chemistry

Numerical Simulation of HCCI Engine with Multi-Stage Gasoline Direct Injection Using 3D-CFD with Detailed Chemistry

Numerical simulation of mixture formation and combustion of gasoline engines with multi-stage Direct Injection Compression Ignition (DICI)

Simulation and Experiments of Advanced Gasoline Engine Combustion Modes from Spark Ignition to Compression Ignition

A numerical investigation of gasoline/diesel direct dual fuel stratification (DDFS) combustion at high loads

Numerical Study of Hydrogen Addition to DME/CH4 Dual Fuel RCCI Engine

3D Numerical Simulation of Spray and Combustion Process for In-cylinder DI Gasoline Engine

Experimental and Numerical Study of the Pollution Formation in a Diesel/cng Dual Fuel Engine