Abstract:In a sustainability context, using renewable energy sources to hedge against increasing consumption of fossil fuels and reduce greenhouse gas emissions becomes increasingly important. The geothermal resource has a great application prospect due to its rich reserves and convenient utilization, and Organic Rankine Cycle (ORC) is a effective method to convert the low-grade geothermal to electricity. To improve the performance of geothermal ORC system, working fluid selection, system parameter optimization and the cycle design are the main approaches. Zeotropic mixtures may show superiority as ORC working fluids due to the temperature glides during the phase transitions, which leads to better temperature matches between the working fluid and the heat source/sink. Moreover, owing to the changing temperature during the transition from liquid to vapor in the vapor generator, supercritical ORC provides a great potential in geothermal utilization and irreversibility reduction. This paper displays an investigation on the performance optimization and economic analysis of various working fluids under subcritical and supercritical conditions. To avoid the silica oversaturation, the geothermal water reinjection temperature should not be less than 70 °C. Turbine inlet temperature, condenser outlet temperature as well as turbine inlet pressure (for supercritical ORC) are optimized to maximize the net power output. Moreover, economic analysis is conducted by taking heat exchanger area per unit power output (APR) and the specific investment cost (SIC) as indicators under the optimal net power output condition. The results shows that working fluid with a medium critical temperature yields greater net power output in supercritical ORC and mixture produces larger net power output compared with its pure components in subcritical ORC. Compared with isobutane (R600a) under subcritical condition, isobutane/isopentane (R600a/R601a) and isobutane/pentane (R600a/R601) under subcritical condition, R134a and R1234ze(E) under supercritical condition yield 3.9%, 3.8%, 8.5% and 8.8% more net power outputs, respectively. In addition, R600a/R601a and R600a/R601 under subcritical condition own higher APR and SIC while R134a and R1234ze(E) under supercritical condition possess lower APR and SIC.

Thermodynamic Analysis of Organic Rankine Cycle System with R1234yf

Cooperative Optimization of System Parameters and Heat Exchanger Structure for Geothermal Organic Rankine Cycle

Thermodynamic Analyses of Sub- and Supercritical ORCs Using R1234yf, R236ea and Their Mixtures as Working Fluids for Geothermal Power Generation

Thermodynamic performance analyses and optimization of subcritical and transcritical organic Rankine cycles using R1234ze(E) for 100–200 °C heat sources

Testing And Thermodynamic Analysis Of Low-Grade Heat Power Generation System Using Organic Rankine Cycle

Organic Rankine cycle driven by geothermal heat source: life cycle techno-economic–environmental analysis

Construction and Preliminary Test of a Low-Temperature Regenerative Organic Rankine Cycle (ORC) Using R123

Optimization of low temperature geothermal organic Rankine power generation system

Optimization of Working Fluids for Low Temperature Geothermal Water Power Generation Based on Organic Rankine Cycles

Thermodynamics Analysis of Power Generation System Based on Regenerative Extraction Organic Rankine Cycles

THERMODYNAMIC ANALYSIS OF POWER GENERATION SYSTEM BASED ON CLOSED ORGANIC RANKINE CYCLE(ORC)

Energy and Exergy Analyses of Geothermal Organic Rankine Cycles Considering the Effect of Brine Reinjection Temperature

Optimized Mass Velocity for Evaporator of Organic Rankine Cycle Using R1234ze(E) for 373.15–423.15 K Geothermal Water

Performance analyses of geothermal organic Rankine cycles with selected hydrocarbon working fluids

Performance Optimization and Economic Analysis of Geothermal Power Generation by Subcritical and Supercritical Organic Rankine Cycles

Experimental Study on a Small-Scale Pumpless Organic Rankine Cycle with R1233zd(E) As Working Fluid at Low Temperature Heat Source

Operation and performance of a low temperature organic Rankine cycle

Working Fluid Selection for a Small-Scale Organic Rankine Cycle Recovering Engine Waste Heat

Exergy Analysis of Two-Stage Organic Rankine Cycle Power Generation System.

Thermo-Economic Analysis and Optimization Selection of Orc System Configurations for Low Temperature Binary-Cycle Geothermal Plant

Thermodynamic and techno-economic performance comparison of two-stage series organic Rankine cycle and organic Rankine flash cycle for geothermal power generation from hot dry rock