Abstract:Addressing issues such as the mass transfer characteristics and internal performance consistency of the air cooling (AC) proton exchange membrane fuel cell (PEMFC) stack. A full-scale AC metal bipolar plate (BP) stack is proposed in this study, comprising inlet and outlet manifolds, membrane electrode assembly (MEA), reaction flow field (FF) and cooling FF. The coupling of electrochemical reactions and heat and mass transfer processes in the stack is simulated using a non-isothermal multiphase numerical model. The characterization of the mass spatial distribution in the stack is explored by varying the stoichiometric ratio of the cathode gas, the thermal boundary conditions, the flow direction of the reaction gas and the air inlet flow configuration . According to the simulation results, it is found that, initially, the simulation errors in the one-dimensional (1D) AC stack are large and mainly concentrated in the concentration loss region. Subsequently, the increased stoichiometric ratio enhances the proton exchange membrane (PEM) water content, improves the local current density by 1.6% and facilitates the discharge of waste heat from the stack. Furthermore, thermal boundary conditions significantly affect the distribution of temperature uniformity in the stack, with high local temperatures causing significant water vapor generation and resulting in oxygen dilution. The counter-flow of hydrogen and air enhances the electrochemical reaction rates in the cathode catalyst layer (CCL) by 0.353%, with the lowest liquid water content in the seventh cell, influenced by the uneven distribution of manifold flow. Finally, changing the position of the cathode manifold gas inlet indicates that the positive flow of the cathode and AC inlets from the Z axis reduces the maximum stack temperature and water vapor by 1.04% and 0.38% respectively. The CCLs in Case 4 have optimal oxygen distribution and output voltages of approximately 0.66 V per fuel cell (FC).

Design and research of fuel cell experiment plat

High temperature proton exchange membrane fuel cell hybrid power system monitoring platform designing

Design of a 5 Kw Distributed Grid-connected Fuel Cell Power System

Modelling and Simulation of A Portable Fuel Cell System

Design of a Fuel Cell Test System with Fault Identification

A Vehicular Proton Exchange Membrane Fuel Cell System Co-Simulation Modeling Method Based on the Stack Internal Distribution Parameters Monitoring

Simulation of the Dynamic Characteristics of a PEMFC System in Fluctuating Operating Conditions

Thermal Management System Modeling and Simulation of a Full-Powered Fuel Cell Vehicle

A Multi-Field Coupled PEMFC Model with Force-Temperature-Humidity and Experimental Validation for High Electrochemical Performance Design

Modeling And Simulation Of A Modern Pem Fuel Cell System

Dynamic Test and Real-time Control Platform of Anode Recirculation for PEM Fuel Cell Systems

Improvement of Temperature and Humidity Control of Proton Exchange Membrane Fuel Cells

Numerical Simulation on Pressure Dynamic Response Characteristics of Hydrogen Systems for Fuel Cell Vehicles

Proton Exchange Membrane Fuel Cell(pemfc) Stack for Vehicles

Design of Experiment (DOE) Analysis of 5-Cell Stack Fuel Cell Using Three Bipolar Plate Geometry Designs

Full-scale three-dimensional simulation of air cooling metal bipolar plate proton exchange membrane fuel cell stack considering a non-isothermal multiphase model

Experimental investigation of dynamic performance and transient responses of a kW-class PEM fuel cell stack under various load changes

Sliding-mode-based Temperature Regulation of a Proton Exchange Membrane Fuel Cell Test Bench

Modeling and operation of a fuel cell stack for distributed energy resources: A living lab platform

Numerical simulation of a mini PEMFC stack

Temperature Control of Fuel Cell Based on PEI-DDPG