Abstract:For the high power LED light resource, it is reasonable to integrate several low power LEDs to improve the total output luminous. The layout of the low power chips and heat sink used has importance influence on the optical performance and the temperature distribution of the multi-chip LED packaging. But previous literatures mailing focused on the optical performance and temperature distribution respectively, few articles had studied both integrately. Firstly, the 3D model of the LED lamp was built in the PRO/Engineer software. The finite element model of the LED lamp was obtained and the temperature distribution was analyzed in ANSYS Workbench software. Then the uniformity of illumination of the multi-chip LED bump packaging was modeled in the Tracepro and DIALux. The impact of the three critical parameters of the LED bump, such as the distance of the multi-chips, the number and the thickness of the heat sink bins, on the optical performance was investigated. Lastly, the optimization of the above three critical parameters was solved with the Uniform Design Experimentation method and GA algorithm. The optimization result shows that the temperature of the high power packaging optimized is about 58.4°C, which is decreased by 30% from the original design and the uniformity of illumination is increased by 4 % compared with the original design.

Simulation and optimization of high-power LED with flat heat pipe heat spreader

Analysis of thermal spreading resistance in high power LED package and its design optimization

Thermal Analysis and Design of High-Power LED Street Light

Thermal Design Based on Thermosyphon Heat Sink of High-Power LED Street Light

The Application of Heat Pipe Heat Sink for High Power LED Lamps

Optimal Design of Cooling Device for High Power LED Headlamp

Study on LED Array Heat Radiator Improvement under Natural Convection

Study on LED array heat transfer under natural convection based on CFD

Design and Optimization of Horizontally-Located Plate Fin Heat Sink for High Power Led Street Lamps

Thermal Management and Heat Dissipation Design for High-power LEDs

Experimental Investigation on a Flat Heat Pipe Radiator for Cooling High Power LEDs

Analysis of Heat Dissipation Performance for Typical High Power LED Secondly-heat Sinks

Study on Application of Heat Pipe Radiator in High Power LEDs for Street Lamp

Thermal Analysis and Optimization of High Power LED Automotive Headlamp Cooling Device

Thermal Optimization on High-Power Led Street-Lighting Driver with Micro Heat Pipe

Simulation on Thermal Characteristics of LED Chips for Design Optimization

Design and Analysis on Mirco Heat Pipe Cooling Solution for High Power LED Illuminator

Improved thermal design of fin heat sink for high-power LED lamp cooling

Impact of the LED chips placement and heat sink design on the multi-chip LED bump performance by the thermal and optical simulation

The Study on High-effect and Mechanism of Heat Dissipation of Tunnel LED

Luminaries-level Structure Improvement of LEDs for Heat Dissipation Enhancement under Natural Convection