Abstract:The use of syngas as an alternative fuel in compression ignition engines is a potential way to curb the emission of pollutants and optimize the performance of these engines. The present research studied the effect of changing fuel injection timing and adding syngas on the output of a heavy-duty diesel engine. The optimal mode of the turbulence model, fuel spray model, combustion model, and pollutant emission model was used to solve computational fluid dynamics. Changing fuel injection timing from 70 to 10° before top dead center (BTDC) and diesel variants, including conventional diesel, diesel + 20% syngas, and diesel + 40% syngas, is the strategy studied here. It was found that the use of syngas could reduce emissions significantly. The in-cylinder mean effective pressure was the highest for diesel + 20% syngas. On the other hand, increasing the rate of syngas and retarding injection timing reduced the ignition period and in-cylinder temperature. The lowest rate of CO emission was obtained from diesel + 40% syngas at a fuel injection timing of 70° BTDC, whereas the lowest particulate matter emission was related to diesel + 40% syngas at 40° BTDC injection timing. The lowest rate of CO2 emission was related to diesel + 40% syngas at a fuel injection timing of 10° BTDC, while the same timing for conventional diesel exhibited the lowest NO X emission rate. Finally, the performance parameters of the engine including indicated power, indicated fuel consumption, and indicated thermal efficiency were decreased with the increase in syngas fraction, so that their highest values were obtained from the conventional diesel at the injection timing of 40° BTDC. In addition, an artificial neural network (ANN) model based on a standard back-propagation learning algorithm was developed for modeling the performance and emissions of the engine. The results for the optimum ANN model showed that the optimal ANN has two hidden layers with 20-25 neurons and the transfer function of logsig-logsig for hidden layers 1 and 2, respectively, and can predict different parameters of the engine for different modes. The correlation coefficients (R-value) of optimal topology for training, validation, and testing are 0.99992, 0.96612, and 0.93424, respectively. The results for the optimum ANN model showed that the constructed model sufficiently predicts the performance and emissions of the CI diesel engine.

Optimization of Fuel Economy for Turbocharged Gasoline Engine Based on Cooled EGR and Compression Ratio

Improving Machine Learning Model Performance in Predicting the Indicated Mean Effective Pressure of a Natural Gas Engine

On the Use of Artificial Neural Networks to Model the Performance and Emissions of a Heavy-Duty Natural Gas Spark Ignition Engine

Investigation of an efficient model-based fuel economy optimization methodology for diesel engines focusing on real world driving emission cycles

An Artificial Neural Network Model to Predict Efficiency and Emissions of a Gasoline Engine

Fuel economy improvement of a turbocharged gasoline SI engine through combining cooled EGR and high compression ratio

Experimental study on the optimization of operating conditions for hybrid powertrain gasoline engines

Artificial Neural Network Modeling and Numerical Simulation of Syngas Fuel and Injection Timing Effects on the Performance and Emissions of a Heavy-Duty Compression Ignition Engine

Turbo-Cool Turbocharging System for Spark Ignition Engines

Effect of Variable-Nozzle-Turbocharger-Coupled Exhaust Gas Recirculation on Natural Gas Engine Emissions and Collaborative Optimization

Modeling Of Two Charge-Air Cooling Turbo-Charging Systems For Spark Ignition Engines

Quantitative Analysis of the Influence Saliency of VVA and EGR on the Fuel Economy and Mixture Combustion Characteristics of a Turbocharged Spark Ignition Engine

Optimizing heat transfer predictions in HCNG engines: A novel model validation and comparative study via quasi-dimensional combustion modeling and artificial neural networks

A Genetic Algorithm Optimized ANN for Prediction of Exergy and Energy Analysis Parameters of a Diesel Engine Different Fueled Blends

The interaction of charge motion and EGR on anti-knock performance and efficiency of a medium-duty gasoline engine: An experimental study

Optimization of a Spark Ignition Engine Knock and Performance Using the Epsilon-Constrained Differential Evolution Algorithm and Multi-Objective Differential Evolution Algorithm

Effective measures to improve thermal efficiency of medium-sized diesel engine in practical application: Energy-exergy analysis and test verification

Artificial Neural Network-Based Prediction of Performances-Exhaust Emissions of Diesohol Piloted Dual Fuel Diesel Engine Under Varying Compressed Natural Gas Flowrates

Comparison and evaluation of advanced machine learning methods for performance and emissions prediction of a gasoline Wankel rotary engine

Effects of Chamber Geometry, Hydrogen Ratio and EGR Ratio on the Combustion Process and Knocking Characters of a HCNG Engine at the Stoichiometric Condition

Predictive GT-Power Simulation for VNT Matching on a 1.6 L Turbocharged GDI Engine