Abstract:Diesel engines operated at high altitudes would experience performance degradation due to the fuel-air amount mismatch, resulting in combustion deterioration. Technologies that supplement oxygen concentration, such as intake oxygen enrichment, turbocharging and the addition of oxygenated fuel additives, can help restore performance at high altitudes, but each has its own limitations Operating diesel engines at high altitudes still generates extremely lean fuel-air mixtures, making the improved utilization of excess air the most economically efficient approach to optimize engine performance under such conditions. The objective of this paper is to investigate the effects of injector nozzle-hole numbers on diesel engines operated at high altitudes, a topic that has been limitedly discussed in existing literature, with the aim of enhancing understanding regarding the potential of this cost-effective approach and aiding in the design of a cooperative approach between oxygen concentration supplementation techniques and better oxygen utilization techniques, ultimately optimizing engine performance at high altitudes. The results suggest that increasing the number of nozzle-holes enhances fuel-air mixing, leading to improved combustion quality and enhancing the engine’s adaptability to altitude. However, at extremely high altitudes, such as altitudes exceeding 3000 meters, configurations with a larger number of nozzle-holes still exhibit high concentrations of incomplete combustion products, such as soot emissions, in the exhaust. This reduced combustion efficiency is mainly attributed to the longer spray penetration length at high altitudes, which causes intensified spray impingement on the cavity wall, subsequently resulting in inefficient combustion of the fuel flowing into the squish zone during spray impingement. This inefficiency may be mitigated by optimizing the shape of the combustion chamber. It is worth noting that increasing the number of nozzle-holes can also lead to a higher pressure rise rate. Considering that high altitude operations already result in a higher pressure rise rate, further increasing the nozzle-hole number may exceed the allowable threshold and increase the likelihood of engine component failure. Consequently, the strength of engine components becomes a limiting factor when attempting to increase the number of nozzle-holes for improved engine altitude adaptation.

Steady Regulation on Plateau for Diesel Engine with Two-stage Turbocharging System

Experimental Research on Performance of Two-stage TurbochargingSystem at Both Plain and Plateau

Analysis on Altitude Adaptability of Turbocharging Systems for a Heavy-Duty Diesel Engine

Thermodynamic cycle characteristics of twin-VGT diesel engine and its control method at variable altitudes

Power recovery of a variable nozzle turbocharged diesel engine at high altitude by response surface methodology and sequential quadratic programming

Investigation of Influence of Two-Stage Turbocharging System on Engine Performance Using A Pre-Design Model

Research on nonlinear model predictive control of regulated two-stage turbocharging system of diesel engine at high altitudes

Establishment of a Two-Stage Turbocharging System Model and Analysis on Influence Rules of Key Parameters

Study on Altitude Adaptability of a Turbocharged Off-Road Diesel Engine

The Effect of High Altitude Environment on Diesel Engine Performance: Comparison of Engine Operations in Hangzhou, Kunming and Lhasa Cities.

Investigation of the Effect of Simulated Atmospheric Conditions at Different Altitudes on the Combustion Process in a Heavy-Duty Diesel Engine Based on Zero-Dimensional Modeling

Valve Timing Based Optimization of Diesel Engine with High Exhaust Back Pressure

Applicability of Variable-Geometry Turbocharger for Diesel Generators under High Exhaust Back Pressure

Study of Two-Stage Turbine Characteristic and Its Influence on Turbo-Compound Engine Performance

Study on Gasdynamic Interaction in a Regulated Two-Stage Turbocharging Turbines at Pulsating Conditions

Modeling Of Two Charge-Air Cooling Turbo-Charging Systems For Spark Ignition Engines

Study on Through-Flow Characteristics of a Diesel Two-Stage Supercharged Centrifugal Compressor under Variable-Altitude and Multiple Operating Conditions

Mathematical Model of Two-Stage Turbocharging Gasoline Engine Propeller Propulsion System and Analysis of Its Flying Characteristic

Numerical Study on the Effect of Injector Nozzle Hole Number on Diesel Engine Performance under Plateau Conditions

Influences of a variable nozzle turbocharger on the combustion and emissions of a light-duty diesel engine at different altitudes

Study on Varying Altitude Self-Adaptive Turbocharging System for Diesel Engine