Abstract:Aiming to further improve the thermal efficiency and reduce NO x emissions in the stoichiometric hydrogen-enriched natural gas (NG) engine, a detailed 3-D simulation model of stoichiometric operation heavy-duty NG engine is built based on the actual boundary conditions from high load bench test. The superimposed methods for knock regulation, combustion and emission control, including Miller valve timing, hydrogen volume fraction and EGR rate were proposed and investigated comprehensively. It reveals that the typically bimodal characteristic of heat release rate (HRR) curve is caused by knock, which seriously restricts the performance improvement of stoichiometric NG engine under high load condition. To predict and control the occurrence of the second peak of HHR accurately, a new parameter BI is defined. Moreover, the Miller timing with 20°CA of the intake valve late closing shows better combustion performance within the knock limit, accompanied by a slight increase in NO x emissions. Additionally, the 5% hydrogen blend, coupled with the Miller cycle, can further enhance the indicated thermal efficiency (ITE) of the NG engine due to the stronger effects on acceleration of laminar flame propagation velocity than the promotion of end-gas auto-ignition. Besides, the great potential of EGR rate for balancing NO x and ITE is also confirmed in the heavy-duty hydrogen-enriched NG engine adopting Miller cycle. Compared to the original indexes, combing with the regulation strategies of intake valve late closing (20°CA), hydrogen addition (5%) and EGR (17%) are proved to increase the indicated thermal efficiency by 1.89% and reduce NO x emissions by 11.47% within the knock limit.

Numerical Simulation of Oxygen-rich CNG Engine Based on 1D/3D Coupled Model

Numerical Investigation of Methane Number and Wobbe Index Effects in Lean-Burn Natural Gas Spark-Ignition Combustion

3D CFD simulation of a CI engine converted to SI natural gas operation using the G-equation

Numerical Simulation Of Re-Entrant Bowl Effects On Natural-Gas Spark-Ignition Operation

Numerical Simulation of Re-Entrant Bowl Effects on Natural Gas SI Operation

Numerical Simulation of HCNG Engine on GT-Power

Investigation of Multistage Combustion Inside a Heavy-Duty Natural-Gas Spark-Ignition Engine Using Three-Dimensional Computational Fluid Dynamics Simulations and the Wiebe-Function Combustion Model

Simulation of Combustion in Spark-Ignition Engine Fuelled with Natural Gas-Hydrogen Blends Combined with EGR

Numerical Research on EGR System of NG Engine

Numerical Simulation of Low Temperature Oxygen-Enriched Combustion of Diesel Engine with the CFD & N-Heptane Sample Model's Coupling

Optimization of Gasoline Engine Intake System Based on 1D, 3D and Coupled Simulations

A numerical investigation on the effects of gaseous fuel composition in a pilot ignited direct injection natural gas engine

Numerical Modeling of Diesel Engine Combustion and Emissions Under HCCI-Like Conditions With High EGR Levels

Structure Optimization of Natural Gas Engine’s Intake Pipe Based on One-Dimensional and Three-Dimensional Coupled Simulation

Numerical simulations and experiments of oxygen-enriched combustion in engine and using liquid oxygen to solidify carbon

Numerical Optimization of the EGR Rate and Injection Timing with a Novel Cavitation Model in a Diesel Engine Fueled with PODE/Diesel Blends

Experimental investigation and numerical assessment the effects of EGR and hydrogen addition strategies on performance, energy and exergy characteristics of a heavy-duty lean-burn NGSI engine

Study on the Performance and Combustion Characteristics of an Engine Fueled with Gasoline/CNG Mixture

Influences of the Control Parameters and Spark Plug Configurations on the Performance of a Natural Gas Spark-Ignition Engine

Numerical investigation on combustion regulation for a stoichiometric heavy-duty natural gas engine with hydrogen addition considering knock limitation

Experimental and Numerical Study of the Pollution Formation in a Diesel/cng Dual Fuel Engine