Application of 3-dimensional Electrode in Water Treatment

Ying CAO,Yu-hong ZHOU,Ke-ning SUN,De-rui ZHOU

DOI: https://doi.org/10.3969/j.issn.1002-1663.2001.02.021

2001-01-01

Abstract:Gives a general description of special features, classification, theory behind and application of three-dimensional electrodes and concentrates on how to use three-dimensional cathodes to remove oxygen dissolved in water.

What problem does this paper attempt to address?

Development of Three-Dimensional Electrode in Refractory Organic Wastewater Treatment

汪群慧,张海霞,马军,李发生,肖羽堂

DOI: https://doi.org/10.3321/j.issn:0253-4320.2004.10.016

2004-01-01

Abstract:The classification and the characteristics of electrochemical wastewater treatment technology enhanced by three-dimensional electrodes are introduced. Special emphasis is put on the status of its development and application, and the combined techniques which united three-dimensional electrodes with electrocatalytic, photocatalytic, ultrasonic, biocatalytic, floccula -tion and adsorption technology. The main trends of the research are to improve the catalytic activity of electrodes and increase current efficiency, and to reduce the polarization of electrodes so as to decrease energy consumption. Finally, the development of three-dimensional electrodes is also reviewed,such as developing efficient three-dimensional electrodes and reactor,and one integrating with other technologies in one system and associating with other unit processes as a combined treatment scheme.
The use of carbon-based particle electrodes in three-dimensional electrode reactors for wastewater treatment

Hua-yu Lu,Wei-feng Liu,Lei Qin,Xu-guang Liu

DOI: https://doi.org/10.1016/s1872-5805(24)60882-6

IF: 5.7

2024-10-27

New Carbon Materials

Abstract:The use of three-dimensional (3D) electrodes in water treatment is competitive because of their high catalytic efficiency, low energy consumption and promising development. The use of particle electrodes is a key research focus in this technology. They are usually in the form of particles that fill the space between the cathode and anode, and the selection of materials used is important. Carbon-based materials are widely used because of their large specific surface area, good adsorption performance, high chemical stability and low cost. The principles of 3D electrode technology are introduced and recent research on its use for degrading organic pollutants using carbon-based particle electrodes is summarized. The classification of particle electrodes is introduced and the challenges for the future development of carbon-based particle electrodes in wastewater treatment are discussed.

materials science, multidisciplinary
An overview of the recent advances and future prospects of three-dimensional particle electrode systems for treating wastewater

Mingyue Piao,Hongxue Du,Honghui Teng

DOI: https://doi.org/10.1039/d4ra04435e

2024-09-02

Abstract:Three-dimensional (3D) electrochemical technology is considered a very effective industrial wastewater treatment method for its high treatment efficiency, high current efficiency, low energy consumption, and, especially, ability to completely mineralize nonbiodegradable organic contaminants. Particle electrodes, which are the fundamental components of 3D electrochemical technology, have multiple functions in the electrochemical reaction process. Various types of particle electrodes have been created and applied for wastewater treatment. Herein, we present a thorough analysis of the research and development of particle electrodes used for electrocatalyzing pollutants. Initially, reactor designs, factors affecting the removal efficiency of pollutants and degradation mechanisms are introduced. In particular, a detailed investigation is conducted into the selection of particle electrode materials and the roles they play in the 3D electrochemical treatment of wastewater. Subsequently, the degradation efficiency and energy consumption associated with 3D electrochemical technology for different pollutants are investigated. Finally, the directions and outlook for further studies on particle electrodes are discussed. We believe that this review will offer a useful perspective on the development and application of particle electrodes for wastewater purification.
Three-dimensional Structured Electrode for Electrocatalytic Organic Wastewater Purification: Design, Mechanism and Role

Xuechuan Li,Sen Lu,Guan Zhang

DOI: https://doi.org/10.1016/j.jhazmat.2022.130524

IF: 13.6

2023-01-01

Journal of Hazardous Materials

Abstract:Considering the growing need in decentralized water treatment, the application of electrocatalytic processes (EP) to achieve organic wastewater purification will be dominant in the near future due to high efficiency, small reactor assembly as well as the flexibility of operation and management. The catalytic performance of electrode materials determines the development of this technology. Among them, the unique three-dimensional (3D) structure electrode shows better performance than two-dimensional (2D) electrode in increasing mass transfer, enhancing adsorption and exposing more active sites. Hence, this review starts with the introduction of definition, classification, advantages and disadvantages of 3D electrode materials. Then a critical discussion on the design and construction of 3D electrode materials for organic wastewater purification application is provided. Next, the removal mechanism of organic pollutants on the surface of 3D electrode, the role of 3D structure, the design of reactor with 3D electrode, the conversion and toxicity of degradation products, electrode energy efficiency, stability and cost, are comprehensively reviewed. At last, current challenges and future perspectives for the development of 3D electrode materials are addressed. We deem that this review will provide a valuable insight into the design and application of 3D electrodes in environmental water purification.
Development of a Three-Dimensional Electrochemical System Using a Blue TiO2/SnO2-Sb2O3 Anode for Treating Low-Ionic-Strength Wastewater.

Xiaoyang Meng,Zefang Chen,Can Wang,Weiqiu Zhang,Kaihang Zhang,Shiqing Zhou,Jinming Luo,Nian Liu,Dandan Zhou,Duo Li,John Crittenden

DOI: https://doi.org/10.1021/acs.est.9b05488

IF: 11.4

2019-01-01

Environmental Science & Technology

Abstract:Reducing energy use is crucial to commercialize electrochemical oxidation technologies. We developed a three-dimensional (3-D) electrochemical system that can significantly reduce the applied voltage and effectively degrade organic contaminants in low-ionic-strength wastewaters. The 3-D system consisted of a composite wire mesh anode (composed of blue TiO2 nanotubes covered with SnO2-Sb2O3), a proton exchange membrane, and a stainless-steel wire mesh cathode, which were compressed firmly together. For the 3-D system, we placed the anode of a 3-D electrode toward the wastewater that flowed past the anode. Both the two-dimensional (2-D) and 3-D systems had the same anode and cathode. We found that the 3-D system could reduce the applied voltage by 75.7% and reduce the electrical efficiency per log order reduction (EE/O) by 73% for 0.001 M Na2SO4. For Na2SO4 concentrations greater than 0.05 M, the 2-D system had a slightly lower EE/O. We also compared the EE/O of electrochemical advanced oxidation processes (EAOPs) with that of other advanced oxidation processes (UV/H2O2, UV/persulfate, O3/H2O2, UV/ TiO2, and UV/chlorine). We found that EAOPs have a much higher EE/O for low BA concentrations (20 mg/L) and a much lower EE/O for high BA concentrations (2000 mg/L).
Study and application status of three-dimensional electrochemical systems for organic wastewater treatment

Nannan Wang,Xu Liu,Ye Yang,Kai Wang,Xitong Huang,Hongan Chen,Cunxin Gong,Liangwei Li,Zhaolin Du,Ziyi Feng

DOI: https://doi.org/10.1016/j.jwpe.2024.106053

IF: 7

2024-08-31

Journal of Water Process Engineering

Abstract:Three-dimensional (3D) electrochemical systems are promising for organic wastewater treatment and have attracted wide attention in recent years. This review discusses some important aspects of 3D electrochemical systems. First, the materials commonly used in the preparation of particle electrodes (PEs) and the common PE preparation methods are successively summarized. Subsequently, the effects of six critical parameters on the performance of 3D electrochemical systems are discussed, and the synergistic operation of 3D electrochemical systems with other wastewater treatment methods is presented. Furthermore, 3D electrochemical reactors are classified and discussed according to the wastewater flow mode and particle polarity of the PE. Finally, the future study directions of 3D electrochemical systems are proposed. This review offers valuable insights into the future development of 3D electrochemical systems in organic wastewater treatment.

engineering, chemical, environmental,water resources
Groundwater Remediation By Three-Dimensional Electrode Biofilm Reactor

Minghua Zhou,Heyan Gu,Lecheng Lei

2005-01-01

Abstract:Groundwater is an important source of drinking water for many people worldwide including Chinese. However, contamination of groundwater by nitrate and organic pollutants, has become an ever-increasing and serious environmental problem worldwide, In this study, a three-dimension electrode biofilm reactor was investigated using a laboratory-scale experimental apparatus for the rapid removal of nitrate. The anode of the system was a novel lead dioxide to decompose residual organics in the groundwater, and the cathode was activated carbon fiber. To enlarge the surface area of electrodes and to attach microorganisms quickly and firmly, activated carbon is packed between anode cell and cathode cell.The study proved that, utilizing the electrochemical autotrophic denitrification process and the oxidation reactions on the cathode, both the nitrate and organics in water could be removed effectively. Under condition of current 15 mA and flow rate of 200 ml/h, current efficiency reached nearly 100%.Using the active carbon as the packed materials, the denitrification efficiency in the three-dimension electrochemical autotrophic denitrification reactor was increased remarkably. The largest denitrification load of 0.216 mg NO3-N/(cm(2.)d) was reached with the highest current efficiency over 260%.It was also found that the hydrogen inhibition effects could be limited due to denitrification taking place on both the cathode and the packed particles in the three-dimension denitrification reactor. In addition, the reactor has the ability of regulating pH of water, because carbon dioxide could be produced on the packed particles during the electrochemical process.
Application of electrode materials and catalysts in electrocatalytic treatment of dye wastewater

Weihang Sun,Dongfang Liu,Minghui Zhang,Weihang Sun,Dongfang Liu,Minghui Zhang

DOI: https://doi.org/10.1007/s11705-021-2108-0

IF: 4.803

2021-10-23

Frontiers of Chemical Science and Engineering

Abstract:The dye industry produces a large amount of hazardous wastewater every day worldwide, which brings potential threaten to the global environment. As an excellent method for removal of water chroma and chemical oxygen demand, electrocatalytic methods are currently widely used in the treatment of dye wastewater. The selection and preparation of electrode materials and electrocatalysts play an important role on the electrocatalytic treatment. The aim of this paper is to introduce the most excellent high-efficiency electrode materials and electrocatalysts in the field of dye wastewater treatment. Many electrode materials such as metal electrode materials, boron-doped diamond anode materials and three-dimensional electrode are introduced in detail. Besides, the mechanism of electrocatalytic oxidation is summarized. The composite treatment of active electrode and electrocatalyst are extensively examined. Finally, the progress of photo-assisted electrocatalytic methods of dye wastewater and the catalysts are described.

engineering, chemical
Pretreatment of hypersaline and high-organic wastewater with a three-dimensional electrocatalytic system: a pilot-scale study

Chengyi Fang,Shiwei Xie,Tian Xiao,Zhi Liu,Hui Hong,Shuyi Gong,Xixiang Liu

DOI: https://doi.org/10.2166/wst.2024.018

IF: 2.43

2024-01-23

Water Science & Technology

Abstract:The three-dimensional electrocatalytic oxidation (3DEO) is a promising electrochemical system in the treatment of refractory wastewater, but still far from large-scale applications. In this work, we prepared 146.5 Kg Ti-Sn-Sb@γ-Al2O3 particle electrodes to construct a 3DEO system for the pretreatment of hypersaline and high-organic wastewater in an industrial park sewage plant, with activated carbon particle electrodes as a comparison. The average COD removal rates of Ti-Sn-Sb@γ-Al2O3 and activated carbon-based 3DEO systems were 24.43 and 48.73%, respectively, and the energy consumption of the two 3DEO systems were 102.8 and 31.4 kWh/Kg COD, respectively. However, compared to the negligible enhancement of wastewater biodegradability in the activated carbon 3DEO system, the Ti-Sn-Sb@γ-Al2O3 3DEO system greatly improved the biochemical index (B/C) from 0.021 to 0.166 (by 690.5%). Due to its superior catalytic capacity, Ti-Sn-Sb@γ-Al2O3 outperforms activated carbon in improving biodegradability as the latter relies mainly on adsorption. The results of this work provide a 3DEO engineering practice experience on the pretreatment of hypersaline and high-organic wastewater.

environmental sciences,engineering, environmental,water resources
Removal of ammonia nitrogen from wastewater by three-dimensional electrode system based on solid waste containing iron

Wenyu Yang,Demin Li,Jing Zhang,Zhaoyang Wang

DOI: https://doi.org/10.4491/eer.2021.411

2021-12-22

Environmental Engineering Research

Abstract:In order to solve the problem of ammonia nitrogen pollution, three-dimensional electrode electrochemical oxidation technology is utilized to transform ammonia nitrogen. The influence of influent pH, power supply and electrolyte concentration on ammonia nitrogen removal by three-dimensional electrode method and its mechanism were discussed by single factor variable analysis. The particle electrode by emission scanning electron microscope (SEM) and energy dispersive spectroscopy (EDS). The results show that the removal efficiency of ammonia nitrogen by three-dimensional electrode is higher than that by two-dimensional electrode. When the aqueous solution is neutral, the direct and indirect oxidation reactions of ammonia nitrogen can reach the best state, and the removal efficiency is the highest. Within a certain range, the electrolytic efficiency will increase with the increase of electrolytic voltage and electrolyte concentration. The reduction of electrode spacing in a certain range can enhance the direct oxidation of ammonia nitrogen and improve the electrolysis efficiency of ammonia nitrogen. Under the conditions of pH 7, power supply voltage 14 V, electrolyte concentration 0.1 mol/L, electrode spacing 1 cm, electrolytic time 50 min, ammonia nitrogen can be completely removed from the three-dimensional electrode.

environmental sciences,engineering, environmental
Electrified water treatment: fundamentals and roles of electrode materials

Kuichang Zuo,Sergi Garcia-Segura,Gabriel A. Cerrón-Calle,Feng-Yang Chen,Xiaoyin Tian,Xiaoxiong Wang,Xiaochuan Huang,Haotian Wang,Pedro J. J. Alvarez,Jun Lou,Menachem Elimelech,Qilin Li

DOI: https://doi.org/10.1038/s41578-023-00564-y

IF: 83.5

2023-05-31

Nature Reviews Materials

Abstract:Electrified processes are a versatile way of removing a wide range of contaminants from water, especially those that are difficult to treat using conventional methods. Electrified processes do not need treatment chemicals and use renewable energy more efficiently. In this Review, we present the fundamental principles of several electrified water treatment processes, discuss the crucial role of electrode materials in the interfacial processes that drive contaminant transport and transformation, and comprehensively review the state of knowledge in electrode material development. Further, we analyse the advantages and limitations of current and emerging electrode materials and discuss strategies for developing advanced electrode materials. Finally, we outline a path towards next-generation water and wastewater treatment systems based on electrified processes.

materials science, multidisciplinary,nanoscience & nanotechnology
Electrocoagulation In Water Treatment

Huijuan Liu,Xu Zhao,Jiuhui Qu

DOI: https://doi.org/10.1007/978-0-387-68318-8_10

2010-01-01

Abstract: Electrocoagulation (EC) is an electrochemical method of treating polluted water where sacrificial anodes corrode to release active coagulant precursors (usually aluminum or iron cations) into solution. At the cathode, gas evolves (usually as hydrogen bubbles) accompanying electrolytic reactions. EC needs simple equipments and is designable for virtually any size. It is cost effective and easily operable. Specially, the recent technical improvements combined with a growing need for small-scale water treatment facilities have led to a revaluation of EC. In this chapter, the basic principle of EC was introduced first. Following that, reactions at the electrodes and electrode assignment were reviewed; electrode passivation process and activation method were presented; comparison between electrocoagulation and chemical coagulation was performed; typical design of the EC reactors was also described; and factors affecting electrocoagulation including current density, effect of conductivity, temperature, and pH were introduced in details. Finally, application of EC in water treatment was given in details.
Simultaneous Removal of Nitrate and Hardness Ions from Groundwater Using Electrodeionization

Zhaoyang Zhang,Aicheng Chen

DOI: https://doi.org/10.1016/j.seppur.2016.03.033

IF: 8.6

2016-01-01

Separation and Purification Technology

Abstract:Nitrate concentrations in groundwater frequently exceed permissible levels for potable water in intensive agricultural regions. It is critical to develop highly efficient techniques for the removal of nitrate at low cost, without the addition of chemicals. In this study, we report on an advanced and efficient approach, referred to as electrodeionization (EDI), for effectively removing and concentrating nitrate with low energy consumption. An additional merit of this process was that hardness ions, such as Ca2+ and Mg2+, were also simultaneously removed from the dilute compartment and recovered in concentrate compartment. Furthermore, the limiting current was systematically investigated and the impacts of different applied currents, water flow rates, and ratios of cationic and anionic exchange resins on the performance of nitrate removal were studied. When treating actual groundwater samples, the EDI system exhibited an excellent removal rate for all ions (>90%) under a low and constant cell voltage. The results confirmed that the EDI process is suitable for the continuous and highly efficacious removal and recovery of nitrate and hardness ions in ground water. (C) 2016 Elsevier B.V. All rights reserved.
Three-Phase Three-Dimensional Electrochemical Process for Efficient Treatment of Greywater

Weiyang Li,Wei Wang,Peng Zhang

DOI: https://doi.org/10.3390/membranes12050514

IF: 4.562

2022-05-13

Membranes

Abstract:Water shortages around the world have intensified the search for substitute sources. Greywater can serve as a solution for water requirements. Compared to two-dimensional electrochemical processes for water treatment, the addition of particle activated carbon enhances the conductivity and mass transfer or the adsorption of pollutants in a three-dimensional (3D) electrochemical process. The large specific surface areas of these particles can provide more reactive sites, resulting in a higher removal efficiency. In this study, the treatment of greywater by the electro-Fenton (E-Fenton) method was carried out in a 3D electrolytic reactor. The effects of the operating conditions, such as electrode spacing, applied voltage, treatment time, and activated carbon loading, on the efficacy of the E-Fenton process were investigated, and the corresponding optimum conditions were found to be 7 cm, 9 V, 2 h, and 10 g. The results showed that CODCr removal of greywater treated using the 3D electrochemical process was 85%. With the help of the Box–Behnken experiment design and the response surface methodology, the parameters were optimized to determine the optimal conditions. The results of the response surface analysis were consistent with the experimental results. The above findings illustrate that the proposed three-phase 3D electrochemical process is feasible for the efficient treatment of greywater.

engineering, chemical,materials science, multidisciplinary,polymer science,chemistry, physical
Development of Electro-Chemical Technology and High Efficiency Catalytic Electrode for Wastewater Treatment

冯玉杰,崔玉虹,孙丽欣,刘峻峰,蔡伟民

DOI: https://doi.org/10.3321/j.issn:0367-6234.2004.04.011

2004-01-01

Abstract:The characteristics, principle and application of electrochemical technology and the current efficiency and the service life of the electrodes are reviewed. A kind of electrodes with high catalytic efficiency, dimensionally stable anodes (DSA) and its application in organic wastewater treatment are discussed in detail with pathway of degradation suggested for some organics, such as aromatic compounds, and the preparation of DSA anodes was discussed as well.
Electrolytic Treatment of Simulative Wastewater Containing Acid Orange 7 Using a Three-phase Three-dimensional Electrode Reactor

XU Lina,SHI Shaoyuan,ZHAO Huazhang,KONG Jiangtao,NI Jinren

DOI: https://doi.org/10.3969/j.issn.1005-0930.2007.01.002

2007-01-01

Abstract:The electrolytic treatment of simulative wastewater containing Acid Orange 7(AO7) was investigated using a three-phase three-dimensional electrode reactor.Experimental results show that the stable treatment efficiency can be attained in this system after the continuous electrolysis for 5 times during batch experiments.Moreover,the removal rates of color,CODcr and TOC for AO7 simulative wastewater can be fitted with the first-order kinetic equations.More electrochemical active substances such as H2O2 generated in the three-phase three-dimensional electrode reactor result in the higher treatment effect for the removal of AO7,in which the removal efficiencies of color and CODcr are about 30% higher than that in the two-dimensional one.The degradation mechanism of AO7 was also investigated by analyzing the variation of AO7 with UV-Vis spectrophotometry during the electrolytic process.
Ammonium nitrogen removal from wastewater with a three-dimensional electrochemical oxidation system.

Jing Ding,Qing-Liang Zhao,Liang-Liang Wei,Yang Chen,Xin Shu

DOI: https://doi.org/10.2166/wst.2013.262

2013-01-01

Abstract:Ammonium-containing wastewater could cause the promotion of eutrophication and a hindrance to the disinfection of water supplies. In this study, the feasibility of removing low-concentration ammonium nitrogen from synthetic and real wastewater by electrochemical oxidation was investigated. Using laboratory-scale electrochemical systems, the effects of chloride concentration, current density, anode materials, cathode materials, electrode gap, initial ammonium concentration and three-dimensional particles on the removal of ammonium nitrogen and current efficiency (CE) were evaluated. Ammonium nitrogen removal was mainly dependent upon anode materials and current density. The performance of two- and three-dimensional electrochemical oxidation systems was comparatively discussed. Both particle electrodes could enhance ammonium nitrogen removal and increase CE. However, the mechanism of the process seemed to be different. Moreover, the interaction of zeolites adsorption and electrochemical oxidation on the anode in a three-dimensional system could favor the regeneration of zeolites. Surface morphology of the used Ru-Ir-Sn/Ti anode revealed its longer working life of electrocatalysis. The result of ammonium degradation for a real wastewater treatment plant effluent showed the degradation rates in a three-dimensional system increased by 1.4 times those in a two-dimensional system.
A review on three-dimensional eletrochemical systems: analysis of influencing parameters and cleaner approach mechanism for wastewater

Kirubanandam GracePavithra,P. Senthil Kumar,V. Jaikumar,PanneerSelvam SundarRajan

DOI: https://doi.org/10.1007/s11157-020-09550-0

2020-09-30

Reviews in Environmental Science and Bio/Technology

Abstract:In recent times, three-dimensional (3D) electrochemical technology was seen as efficient treatment in treating wastewater. 3D-system was found to be more superior to two-dimensional (2D) system due to its large surface area and short mass transfer distance. This paper mainly focuses on the major main electrodes as well as particle electrodes utilised so far. The mechanism involved in 3D electrochemical reactor, its advantages and the structure of this 3D system have been discussed. The influencing operating parameter such as pH, current density, circulation flow, inter-electrode distance, hydraulic retention time, initial pollutant concentration, particle electrode dosage was discussed. The synergic effects due to the involvement of particle electrode were also discussed. The usage of 3D-system as pre-treatment as well as combined system was presented in detail.
Application of electrocoagulation technology to water treatment

Zhang Shilei,Jiang Xujia,Hong Guoliang,Tong Meiping

DOI: https://doi.org/10.3969/j.issn.1005-829X.2013.01.003

2013-01-01

Abstract:As an environment-friendly technology,electrocoagulation has many advantages,such as less occupied land,wide pollutant species to be removed,high removing efficiency and easy operation,etc.Therefore,it has been widely used for treating various non-biodegradable polluted wastewater and influencing factors of this technology are fully discussed.Some typical applications of the technology to water treatment are analyzed.At the end,by using bibliometric method,the hotspots and devolopment trend of electrocoagulation technology are analyzed.
Three-dimensional biofilm electrode reactors (3D-BERs) for wastewater treatment

Zhen-Yu Wu,Juan Xu,Lan Wu,Bing-Jie Ni

DOI: https://doi.org/10.1016/j.biortech.2021.126274

IF: 11.4

2022-01-01

Bioresource Technology

Abstract:Three-dimensional biofilm electrode reactors (3D-BERs) are highly efficient in refractory wastewater treatment. In comparison to conventional bio-electrochemical systems, the filled particle electrodes act as both electrodes and microbial carriers in 3D-BERs. This article reviews the conception and basic mechanisms of 3D-BERs, as well as their current development. The advantages of 3D-BERs are illustrated with an emphasis on the synergy of electricity and microorganisms. Electrode materials utilized in 3D-BERs are systematically summarized, especially the critical particle electrodes. The configurations of 3D-BERs and their integration with wastewater treatment reactors are introduced. Operational parameters and the adaptation of 3D-BERs to varieties of wastewater are discussed. The prospects and challenges of 3D-BERs for wastewater treatment are then presented, and the future research directions are proposed. We believe that this timely review will help to attract more attentions on 3D-BERs investigation, thus promoting the potential application of 3D-BERs in wastewater treatment.

energy & fuels,biotechnology & applied microbiology,agricultural engineering

Application of 3-dimensional Electrode in Water Treatment

Development of Three-Dimensional Electrode in Refractory Organic Wastewater Treatment

The use of carbon-based particle electrodes in three-dimensional electrode reactors for wastewater treatment

An overview of the recent advances and future prospects of three-dimensional particle electrode systems for treating wastewater

Three-dimensional Structured Electrode for Electrocatalytic Organic Wastewater Purification: Design, Mechanism and Role

Development of a Three-Dimensional Electrochemical System Using a Blue TiO2/SnO2-Sb2O3 Anode for Treating Low-Ionic-Strength Wastewater.

Study and application status of three-dimensional electrochemical systems for organic wastewater treatment

Groundwater Remediation By Three-Dimensional Electrode Biofilm Reactor

Application of electrode materials and catalysts in electrocatalytic treatment of dye wastewater

Pretreatment of hypersaline and high-organic wastewater with a three-dimensional electrocatalytic system: a pilot-scale study

Removal of ammonia nitrogen from wastewater by three-dimensional electrode system based on solid waste containing iron

Electrified water treatment: fundamentals and roles of electrode materials

Electrocoagulation In Water Treatment

Simultaneous Removal of Nitrate and Hardness Ions from Groundwater Using Electrodeionization

Three-Phase Three-Dimensional Electrochemical Process for Efficient Treatment of Greywater

Development of Electro-Chemical Technology and High Efficiency Catalytic Electrode for Wastewater Treatment

Electrolytic Treatment of Simulative Wastewater Containing Acid Orange 7 Using a Three-phase Three-dimensional Electrode Reactor

Ammonium nitrogen removal from wastewater with a three-dimensional electrochemical oxidation system.

A review on three-dimensional eletrochemical systems: analysis of influencing parameters and cleaner approach mechanism for wastewater

Application of electrocoagulation technology to water treatment

Three-dimensional biofilm electrode reactors (3D-BERs) for wastewater treatment