Study on Electromagnetic Losses in High-speed Permanent Magnet Brushless Machines-the State of the Art
SHEN Jianxin,LI Peng,HAO He,YANG Guang
DOI: https://doi.org/10.13334/j.0258-8013.pcsee.2013.03.009
2013-01-01
Abstract:High-speed permanent magnet(PM) brushless machines have attracted extensive attentions,while their electromagnetic power losses and relevant reduction methods are critical research issues.Firstly,since the fundamental frequency is high(1 kHz),extra copper loss occurs due to the skin effect and the proximity effect of the stator windings.It can be suppressed by winding with thin wires in parallel.Moreover,due to the high alternating frequency of stator core field,iron loss increases significantly.It can be reduced by choosing a small number of poles,designing the stator cores with uncommonly low field,and using core materials with low specific iron loss.Further,as the frequencies of stator MMF harmonics and that of airgap permeance variation are some times higher than the fundamental frequency,rotor eddy current loss which is usually negligible in low or moderate-speed machines becomes remarkable in the high speed machines.It can be suppressed by reducing the stator MMF harmonics,decreasing the stator slot openings,enlarging the airgap length,axially segmenting the magnets,employing the rotor conductive shield,or circumferentially grooving the rotor retaining sleeve.Finally,appropriate control strategies,such as the phase-advancing control for PM brushless dc motors and the field-weakening control for PM synchronous machines,are beneficial to reduce the electromagnetic losses.