Abstract:Although heavy ion irradiation is a good tool to simulate neutron irradiation-induced damages in light water reactor, it produces inhomogeneous defect distribution. Such difference in defect distribution brings difficulty in comparing the microstructure evolution and mechanical degradation between neutron and heavy ion irradiation, and thus needs to be understood. Stainless steel is the typical structural material used in reactor core, and could be taken as an example to study the inhomogeneous defect depth distribution in heavy ion irradiation and its influence on the tested irradiation hardening by nano-indentation. In this work, solution annealed stainless steel model alloys are irradiated by 3MeV Fe2+ ions at 400°C to 3dpa to produce Frank loops that are mainly interstitial in nature. The silicon content of the model alloys is also tuned to change point defect diffusion, so that the loop depth distribution influenced by diffusion along the irradiation beam direction could be discussed. Results show that in low Si (0% Si) and base Si (0.42% Si) samples the depth distribution of Frank loop density quite well matches the dpa profile calculated by the SRIM code, but in high Si sample (0.95% Si), the loop number density in the near-surface region is very low. One possible explanation could be Si’s role in enhancing the effective vacancy diffusivity, promoting recombination and thus suppressing interstitial Frank loops, especially in the near-surface region, where vacancies concentrate. By considering the loop depth distribution, the tested irradiation hardening is successfully explained by the Orowan model. A hardening coefficient of around 0.30 is obtained for all the three samples. This attempt in interpreting hardening results may make it easier to compare the mechanical degradation between different irradiation experiments.

Modeling of Evolution of Radiation-induced Frank Loops in Austenitic Stainless Steels

The Effects of Loop Size on the Unfaulting of Frank Loops in Heavy Ion Irradiation

Depth Distribution of Frank Loop Defects Formed in Ion-Irradiated Stainless Steel and Its Dependence on Si Addition

Evolution mechanisms of irradiation-induced helium bubbles, C15 clusters and dislocation loops in ferrite/martensite steels: A cluster dynamics modeling study

Evolution of dislocation loops in irradiated α-Uranium: An atomistically-informed cluster dynamics investigation

In-situ TEM investigation of dislocation loop evolution in Al-forming austenitic stainless steels during Fe+ irradiation: Effects of irradiation dose and pre-existing dislocations

Dislocation loops growth and radiation growth in neutron irradiated Zr-Nb alloys: rate theory modelling

Dislocation loop evolution and radiation hardening in nickel-based concentrated solid solution alloys

Dynamic observation of dual-beam irradiated Fe and Fe-10Cr alloys at 435 °C

Examining the Effects of Irradiation Temperature on Defect Generation and the Nature of Dislocation Loops

Radiation Defects Formed in Ion-Irradiated 316l Stainless Steel Model Alloys with Different Si Additions

Formation of vacancy dislocation loops from two-dimensional vacancy platelets in body-centered cubic iron

Molecular dynamics study of interactions between edge dislocation and irradiation-induced defects in Fe–10Ni–20Cr alloy

Effect of hydrogen, helium and dose rate on the evolution of dislocation loop in pure iron during in-situ irradiation

Effect of dose rate on dislocation loop evolution in tungsten: Combination of defect generation rate and elastic interaction

In-situ TEM observation and MD simulation of the reaction and transformation of loops in tungsten during H2+ & He+ dual-beam irradiation

Formation of < 100 > Vacancy Dislocation Loops from Two-Dimensional Vacancy Platelets in Body-Centered Cubic Iron

Mechanical characterization of synergistic thermal and irradiation effects on fracture resistance of stainless steel

Formation of Ni-Si clusters and their relationship with dislocation loops in irradiated stainless steels

Investigation of Interactions Between Defect Clusters in Stainless Steels by in Situ Irradiation at Elevated Temperatures

Simulation of the nanostructure evolution under irradiation in Fe-C alloys