Abstract:In the design of fusion reactors, determining radiation levels due to neutrons and photons (gammas) throughout the reactor and its surroundings is important. Radiation transport codes need to have accurate cross-section libraries in order to produce accurate results. The Fusion Evaluated Nuclear Data Library (FENDL) is an international effort coordinated by the International Atomic Energy Agency, Nuclear Data Section, that assembles a collection of the best nuclear data for fusion applications. In the current FENDL-3.1d data library, neutron cross sections for 65 of the 180 isotopes present in the library come from ENDF/B-VII.1.Monte Carlo–based neutronics calculations using cross-section libraries from FENDL (versions 2.1 and 3.1d), ENDF/B (versions VII.1 and VIII.0), and candidate new evaluations for key structural elements/isotopes such as iron and chromium were performed. The calculations were performed in reactor-relevant models including a one-dimensional (1-D) cylindrical model of ITER, a three-dimensional (3-D) computer-aided design (CAD)–based model of ITER, and a 3-D CAD-based model of the U.S. Fusion Energy System Studies Fusion Nuclear Science Facility (FNSF).The results show that neutron fluxes calculated with different cross-section libraries can be as much as 12% higher and as much as 8% lower than those calculated with the reference cross-section library (FENDL-2.1). Nuclear heating calculated with different cross-section libraries can be as much as 14% higher and as much as 8% lower than those calculated with the reference cross-section library. Iron displacements per atom calculated with different cross-section libraries can be as much as 9% higher and as much as 9% lower than those calculated with the reference cross-section library. Helium production calculated with different cross-section libraries can be as much as 19% higher and as much as 2% lower than those calculated with the reference cross-section library. Tritium production in the ITER 1-D model's nonbreeding regions calculated with different cross-section libraries can be as much as 246% higher and as much as 5% lower than those calculated with the reference cross-section library. The tritium breeding ratio in the FNSF 3-D model calculated with different cross-section libraries averaged 1% higher at the inboard and 1.4% higher at the outboard than those calculated with the reference cross-section library.

Research on Nuclear Reaction Network Equation for Fission Product Nuclides in Strong Neutron Field

Evaluation of the Nuclear Data on (α, n) Reaction for F, Na, Al, Cr, Fe, Ni, and Cu

Thermal-to-fusion Neutron Convertor and Monte Carlo Coupled Simulation of Deuteron/triton Transport and Secondary Products Generation

A New Evaluation of Fission Product Yields for the Neutron Induced Fission of U-233 and Th-232

Multilayer network analysis of nuclear reactions

Monte Carlo simulation of fission yields, kinetic energy, fission neutron spectrum and decay γ-ray spectrum for 232Th(n,f) reaction induced by 3H(d,n) 4He neutron source

Use of MCNP to Simulate Nuclear Detection of Inertial Confinement Fusion

Nuclear Data Online Services at Peking University

Production mechanism of neutron-deficient actinide isotopes in complete fusion reactions and multinucleon transfer reactions

The nuclear reaction network WinNet

Calculation of the energy dependence of fission fragments yields and kinetic energies distributions for neutron-induced 235U fission

Neutron Thermal Cross Sections, Westcott Factors, Resonance Integrals, Maxwellian Averaged Cross Sections and Astrophysical Reaction Rates Calculated from Major Evaluated Data Libraries

Development and Verification of Neutron Kinetics Parameter Calculation Program Applicable to Subcritical Systems of Long-Life Reactors

FSAR: Full neutron spectrum code for advanced reactor simulation

Analysis of Neutron Fission Reaction Rate in the Nuclear Fuel Cell Using Collision Probability Method with Non Flat Flux Approach

A systematic study of the fission and evaporation residue excitation functions in complete fusion reactions with weakly bound stable nuclei

The NUIT Code for Nuclide Inventory Calculations

Production of Heavy N-Rich Nuclei in Multinucleon Transfer Reactions

Geant4 Extension for Neutronic Calculation of Nuclear Reactor Core

Neutronics Calculations to Support the Fusion Evaluated Nuclear Data Library (FENDL)

Study On Neutronics And Fuel Cycle Of Fusion-Fission Hybrid Reactor