Abstract:The present paper introduces the stray light and bandpass correction methods for spectrometers. The line spread function of spectrometer is characterized by a He-Ne laser. Assuming that the spectrometer is a wavelength invariable system, the stray light distribution matrix is constructed by the derived line spread functions. The stray light correction matrix is then derived by matrix conversion from the stray light distribution matrix. The measured signals of the spectrometer are finally multiplied by the stray light correction matrix to correct the stray light errors. The bandpass functions of the spectrometer are characterized in three different wavelength ranges, respectively. And then three groups of bandpass correction coefficients are calculated accordingly. The calculation is divided into several steps. Given the measurement results at the target wavelength position and the ones on the neighbor bandwidths, the bandpass correction results are obtained by weight averaging of them. The bandpass correction coefficients are used as the weights. The two correction methods are applied to a multi-channel fast spectrometer to measure LEDs of different color. The results show that the stray light and the bandpass errors can be corrected effectively. The chromaticity coordinates of the LEDs are corrected by (-0.003, 0.007) for the maximum. Furthermore, the method introduced in this paper can reduce the application cost, simplify the calculation under a reasonable precision, and make the application of the correction easier.

A Spectral Transmission Measurement System of LED Optical Lens

Spectrum measurement for LED-based spectrum-tunable source

Stray Light And Bandpass Correction In The Spectral Measurement For Light Emitting Diodes

Optical Design in Packaging and Illuminating System for High Power Light-Emitting Diodes for Projection System

Experimental Research On Distribution Of Led'S Light Intensity

The Method of Reflective Fly Eye Lens Design for LED Illuminating Projection System

Secondary Optical Design for LED Illumination Using Freeform Lens

Freeform Led Lens For Uniform Illumination

Measurement of Led Spatial Intensity Distribution Using Imaging

Stray light errors in spectral colour measurement and two rejection methods

Study on a Spectrophotometer System for Measuring LED's Photometric Parameters

Fast and High-Accuracy Spectral Measurements of LED by Linear CCD Sensor and Software Calibration

Freeform Lens Design for LED Illmination

Freeform Surface Lens for LED Uniform Illumination.

Study on a system for LED's photometric and colorimetric measurement based on a multi-channel spectrometer

Etendue analysis and measurement of light source with elliptical reflector.

A research of laboratory instrument for LED property measurement

Secondary light distribution design for LED street light

Optical design of a LED searchlight system

Study on the LED's Total Flux Measurement System

A New Way to Measure the Luminous Intensity Distribution of LEDs Based on Luneburg Lens