Abstract:The calculation of main circuit parameters is an important constituent part in the design of HVDC transmission projects. Each pole of the ±800 kV 7500 MW DC power transmission project from Xiluodu to Zhexi is composed of two series connected 12-pulse converters, thus the operation modes of the DC transmission project can be flexibly regulated. According to the theory of UHVDC power transmission and the features of DC system, main circuit parameters of the DC transmission project is studied and designed. Following main design parameters of converter stations at both ends of the DC transmission project are obtained from the calculation results: inductance of smoothing reactor for each pole of each station is 4×75 mH, this 4×75 mH inductance is splitted into two equal parts, one part is connected to pole bus and the other is connected to neutral bus; the converter transformers are composed of single-phase two-winding transformers, at Xiluodu side the rated capacity of each single-phase transformer is 378.5 MVA and its rated phase voltage is 171.3 kV and at Zhexi side the rated capacity of each single-phase transformer is 358.4 MVA and its rated phase voltage is 162.2 kV, the short-circuit impedances of converter transformer are 19% for both ends of the project while the tap changer is not adjusted; the number of transformer taps is set to +21/-6 at Xiluodu side and +24/-4 at Zhexi side, and voltage difference between two adjacent taps is 1.25% of the rated votlage at both sides; the absolute maximum no-load DC voltage 239.0 kV at Xiluodu side and 227.0 kV at Zhexi side. These data can be used as the foundation for subsequent research item of this project and is available for reference to other UHVDC transmission projects.

Medium Voltage Direct Current Transmission System Based on Modular Air Cooling Converter Valve

Evaluation of the Front-End AC/DC Converter Circuits for Medium-Voltage-Connected Power Supply Systems

Research on the Vertical Installation Technology in Flexible DC Valve Hall

VSC-MTDC Transmission Technologies and Its Application in Zhoushan

Bidirectional Modular Multilevel Resonant DC Converter for MVDC and LVDC Application

Energy storable VSC-HVDC system based on modular multilevel converter

A Multilevel-DC-Link Converter with Single-Device-Modules in Series for VSC-HVDC Application

Study and design of main circuit parameters for ±800 kv/7500 MW DC power transmission project from Xiluodu to Zhexi

Research on the Transformerless Connection Mode for DC Power Distribution System

Study on Hybrid HVDC Transmission Technology Used for Upgrading of Conventional HVDC Transmission System

A Sharing-Branch Modular Multilevel DC Transformer with Wide Voltage Range Regulation for DC Distribution Grids

The Development of HVDC Transmission System

Distributed Control System and Two-layer Voltage Balancing Method for Large-scale Modular Multilevel Converters

Application of Modular Multilevel Converter in Medium Voltage High Power Permanent Magnet Synchronous Generator Wind Energy Conversion Systems

Cascaded H7 Current Source Converter Based Power Transmission System And Fault Analysis

Thermal Distribution Analysis of Modular Multilevel DC-DC Converters

Multiple Modular DC Transformer for Flexible HVDC Application

Modular Medium Voltage AC to Low Voltage DC Converter for Extreme Fast Charging Applications

A Unidirectional Hybrid HVDC Transmission System Based on Diode Rectifier and Full-Bridge MMC

A Novel DC Transmission and Distribution System with 100% New Energy Consumption

A Multilevel DC-Link Converter for VSC-HVDC Application