Abstract:The liquid metal bridge generated at the microspot of the contact has a crucial role in the formation of the arc, which provides the initial energy distribution for the ignition of the arc when the dc air circuit breaker is interrupted. A transient model of microspot thermal process which includes solid, liquid, and gas phase transition of liquid metal bridge during dc air circuit breaker contact separation was established in this article. The key parameters such as temperature, electric potential, and melting voltage of the material during liquid metal bridge formation process were analyzed, and the effects of different microspot surface topographies and contact materials on the liquid metal bridge formation process were also considered. The results show that the microscopic contact surface topography affects the contact microspot thermal process. The liquid metal bridge is formed fastest in pin-pin microspot surface topography and slowest in sphere-sphere microspot surface topography. The formation of the liquid metal bridge of the pure silver contact is the fastest and that of the pure tungsten contact is the slowest at the pin-pin microspot surface topography. A reasonable choice of contact materials can slow down the formation of liquid metal bridge and reduce contact ablation, which can improve the reliability of the circuit breaker and extend contact service life. This article can provide a reference for further research on the mechanism of arc formation process and exploring of ablation resistance contact materials. It can also provide a complement to the traditional arc magneto-hydro-dynamic (MHD) modeling.

The Molten Bridge Erosion Between Contacts Analysis

Experimental Study on Root Profile of Molten Bridge under Different Current at Low Opening Speed.

Experimental Investigation and Understanding of the Intermittent Molten Bridge Phenomena and Mechanism of Contacts With Superlow Opening Speed

Valuations of Charging Efficiency and Critical Gap for Electron Tunnelling under Contact Electrification Model

Research on the Liquid Metal Bridge Formation Process at Contact Separation Moment of DC Air Circuit Breaker

Formation Process of Intermittent Molten Bridge Between Au-Plated Contacts at Super Low Breaking Velocity

Evaporation Erosion During the Relay Contact Breaking Process Based on A Simplified Arc Model

Transient Thermal Field Simulation Method of Relay Contacts Breaking Process

Experimental Research on Contact Erosion Characteristics Under Steady Arc

The Influence of Different Parameter on Electrode Erosion During Opening Process

Comparisons on Arc Behavior and Contact Performance Between Cu and Cu-Mo Alloys in a Bridge-Type Contact System.

Experimental Study On Arcing Process And Contact Erosion Under Transverse Magnetic Field

Evaporation Erosion of Contacts under Static Arc by Gas Dynamics and Molten Pool Simulation

Numerical Modeling of Contact Erosion Including Both Vaporization and Sputter Erosion

Effects of Current Load on Wear and Melt Erosion of Electrical Contacts under Fretting Condition

An Experimental Investigation of Dynamic Welding Mechanism of Contacts Used in Low Current Switching Devices

Mechanisms of Solid-Liquid Evolution and Current-Carrying Characteristics at Contact Interface under the Magneto-Thermal Effect

Erosion Characteristics of Bipolar Axial Magnetic Field Contact Exposed to High Current Vacuum Arcs

Numerical Simulation and Analysis of Contact Erosion by High-Current and Low-Voltage Air Arc Considering the Movement of Arc

Transient mixed-lubrication and contact behavior analysis of metal liquid film under magneto-thermal effect

Experimental Investigation of Contact Welding Characteristics of Electromechanical Relays