Visual-Based Kinematics and Pose Estimation for Skid-Steering Robots
Xingxing Zuo,Mingming Zhang,Mengmeng Wang,Yiming Chen,Guoquan Huang,Yong Liu,Mingyang Li
DOI: https://doi.org/10.1109/tase.2022.3214984
IF: 6.636
2022-01-01
IEEE Transactions on Automation Science and Engineering
Abstract:To build commercial robots, skid-steering mechanical design is of increased popularity due to its manufacturing simplicity and unique mechanism. However, these also cause significant challenges on software and algorithm design, especially for the pose estimation (i.e., determining the robot’s rotation and position) of skid-steering robots, since they change their orientation with an inevitable skid. To tackle this problem, we propose a probabilistic sliding-window estimator dedicated to skid-steering robots, using measurements from a monocular camera, the wheel encoders, and optionally an inertial measurement unit (IMU). Specifically, we explicitly model the kinematics of skid-steering robots by both track instantaneous centers of rotation (ICRs) and correction factors, which are capable of compensating for the complexity of track-to-terrain interaction, the imperfectness of mechanical design, terrain conditions and smoothness, etc. To prevent performance reduction in robots’ long-term missions, the time-and location-varying kinematic parameters are estimated online along with pose estimation states in a tightly-coupled manner. More importantly, we conduct in-depth observability analysis for different sensors and design configurations in this paper, which provides us with theoretical tools in making the correct choice when building real commercial robots. In our experiments, we validate the proposed method by both simulation tests and real-world experiments, which demonstrate that our method outperforms competing methods by wide margins. Note to Practitioners—This paper was motivated by the problem of long-term pose estimation of the commonly commercial-used skid-steering robots with only low-cost sensors. Skid-steering robots change their orientation with a skid, which poses a significant challenge for pose estimation when using the wheel encoders. We propose to online estimate the robot’s kinematics, which succeeds in compensating for the complexity of track-to-terrain interaction, due to the slippage, the imperfectness of mechanical design, terrain conditions and smoothness. It is critical to estimate the kinematics and poses jointly to prevent performance reduction in robots’ long-term missions. We further theoretically analyze whether the kinematics parameters can be estimated under different sensor configurations, and find out the special degrade motions that make the parameters unobservable.
automation & control systems