Abstract:By utilizing customized intra-cavity optical elements including graded-phase mirrors, variable reflectivity mirrors, aspherical mirrors, diffractive optical elements and spatial light modulators, the mode discrimination of the cavity is enhanced and a pre-determined transverse mode, usually flat-top beams such as super-Gaussian beams or flattened-Gaussian beams, can be generated in the cavity. The design of such laser cavities oscillating in a predetermined transverse mode is commonly based on the concept of phase conjugation, whereby the desired phase profile of optical element is obtained by reversely propagating the predetermined transverse mode and creating a conjugate field to propagate back. However, this procedure is only accurate under the assumption that the mirror size is infinite and the propagation process is in a lossless manner. Moreover, the parameters of the pre-determined mode, such as beam size and amplitude distribution, must be carefully chosen or else non-negligible errors would occur due to finite-size apertures and associated truncation. Here, we report on a simple and effective approach for intra-cavity mode control based on optimizing the single-mode power factor, which represents the total power extracted by a single mode from the active medium. By optimizing the single-mode power factor of the desired mode, the cavity can be designed to operate in mono-mode, increasing the mode purity significantly. Our method is verified on a digital laser with a spatial light modulator as the rear mirror and the loaded phase profile is acquired by a simulated annealing algorithm. As a result, when the single-mode power factor of TEM00 mode is optimized, the resonator operates in a single fundamental mode. When the single-mode power factor of the vortex mode with a topological charge of 1 is optimized, the output mode purity is close to 100%.

Parameter optimization of all-solid-state laser dual-wavelength composite output cavity

Coherent Combining of Two Pulsed Solid State Lasers

Nonlinearity Optimization of Dissipative-Soliton Fiber Laser for Generation of Pulses with 350 Kw Peak Power

LD Pumped 946 Nm Nd:YAG Laser and Intracavity-doubling

Optimization of Brightness in a Nd:YAG Laser by Maximizing the Single-Mode Power Factor with an Intra-Cavity Spatial Light Modulator

Analysis of the CW Single Frequency Laser Radiation from UV to Near-Ir Generated by Intra-Cavity Second Harmonic Generation of the Resonant Wave in Singly Resonant Optical Parametric Oscillator under Collimated Gaussian Beam Approximation

High Efficiency Frequency Doubling with a Passive Enhancement Cavity

Realization of Narrow Linewidth Property Based on Ultra-Stable Cavity in Precision Optics Teaching

Experimental research on LD-pumped Nd∶YAG/KTP intracavity frequence doubling CW green laser

A 1064- and 1074-Nm Dual-Wavelength Nd:YAG Laser Using a Fabry–Perot Band-pass Filter As Output Mirror

Systemic Optimization of Linear Cavity Yb-doped Double-Clad Fiber Laser

Dual-signal-resonant Optical Parametric Oscillator Intracavity Driven by a Coaxially End-Pumped Laser with Compound Gain Media

High repetition rate dual-rod acousto-optics Q-switched composite Nd:YVO4 laser.

Practical Multisegment Composite-Cavity Semiconductor Lasers

Improvement of the Performance of an Acousto-Optical Q -Switched Nd:YAG 946 Nm Laser Using a Convex–Plane Cavity

Cavity Tuning Characteristics of Microchip Nd∶YAG Dual-Frequency Laser

LD Pumped 1061 Nm/1064 Nm Dual-Wavelength Nd∶YAG Microchip Laser

Thermal-Induced Birefringence-Compensated Laser System with Two Nd∶ YAG Rods

1.60 W CW Output 473 Nm Linear Cavity Blue Laser

Laser Performance of Nd : Yag at 946 Nm and Frequency Doubling with Periodically Poled Litao3

Output Characteristics of LD End-Pumped Nd:YVO4 Solid-State Laser with Flat-Flat Cavity