Abstract:In this paper, we introduce a flexible and simple system calibration method for specular surface metrology based on the combination of reflection rays determined by the varied points on a screen and reflection images of a plane mirror without fiducials placed at three different locations. This calibration procedure involves three steps. The camera is first calibrated based on plane patterns. Then the reflection ray directions are measured via correspondence matching. The last calibration step is the pose estimation by the orthogonal iteration algorithm and reflections in a plane mirror. Basically, the concept of replacing the coordinates of the camera center with the reflection ray can alleviate the trouble of imaging aberration. Then global optimization can be operated with the orthogonal projection defined by the reflection ray, providing precise initial values for the process of bundle adjustment, compared to the classical calibration approach directly using the local optimization algorithm. Simulations and experiments both demonstrate the validity, efficiency, and robustness of the proposed improved method. In the simulations, the proposed method achieves the absolute errors of the camera parameters within 3 pixels and the relative errors of the screen pose are below 0.5% when the noise level is 0.6 pixel. Furthermore, the calibration method shows strong anti-noise ability, relying on the application of the reflection rays and the global optimization before the final bundle adjustment. In addition, the reconstruction accuracy in our experiment improves by 60.11% by the proposed method compared with the calibration procedure, which only utilizes the bundle adjustment optimization. In general, this novel calibration method can make the measurement achieve high accuracy and robustness at a low cost and with a simple setup, providing an efficient, economical, and flexible approach for a phase measuring deflectometry system in practical situations.

Optimization of Calibration Method for the Secondary Mirror Fine Tuning Stewart Mechanism of Optoelectronic Telescope

Model Design for Adjustment Mechanism of Imaging Lens's Focal Length of Space Solar Telescope

An Optimization Based Vision Calibration Method for PTZ Camera's Errors in Model and Execution

Optimal Design of Pose and Position Fine Tuning Apparatus for Secondary Mirror in Large Optical Telescope

Kinematic Calibration of Stewart Mechanism Based on Generalized Force Principle

Posture optimization of a 3-6R parallel mechanism for secondary mirror truss applied on large telescopes

A Novel Error Model of Optical Systems and an On-Orbit Calibration Method for Star Sensors.

Iterative optimization calibration method for stereo deflectometry

Field-balancing Alignment of the Secondary Mirror of Space Telescope Using a Self-Calibrated Model

A Novel Calibration Character Study for Micro-Displacement Actuators with Segmented Mirrors

Calibration method and experiment of Stewart platform using a laser tracker

Kinematics Accuracy Analysis of a Fine Tuning Platform for the Large Radio Telescope

Modeling and digital calibration for the mirror normal pointing error of the 2D scanning reflector

Novel approach for laboratory calibration of star tracker

Calibration of Stewart Platform Based on Coordinate Measurement

3D Global Optimization of Calibration Parameters of Deflectometry System by Using a Spherical Mirror

Optimization Design For The Supporting System Of 2m Telescope Primary Mirror

Improved System Calibration for Specular Surface Measurement by Using Reflections from a Plane Mirror.

Line-of-sight Kinematics Modeling and Correction for Precision Pointing Systems Based on a Two-Axis Fast Steering Mirror

High-Precision Automatic Calibration Modeling of Point Light Source Tracking Systems

Coordinates Calibration in Precision Detection of 3D Optical Deformation Measurement System