Abstract:The measurement of five degrees-of-freedom (5-DOF) error motions, including radial, axial, and tilt motions, is crucial for ultra-precision rotary axes, which are key components of ultra-precision machine tools and instrumentation. In this study, we propose an interference-enhanced micro-vision technique to concurrently derive the 5-DOF error motions from a single-shot two-dimensional image, which was captured by a standard industrial camera equipped with an interference objective lens. By consolidating the essential features into a single optical path, the interference-enhanced micro-vision technique ingeniously merges machine micro-vision and modified white-light interference to detect in-plane and out-of-plane motions. Numerical simulations demonstrated, the basic principle for deriving the 5-DOF error motions, and the magnification of objective lens had inconsistent effects on the measurement accuracy for the radial and tilt motions, i.e. higher magnification led to higher radial accuracy but lower tilt accuracy. As practical application, the error motion detection capability was demonstrated by simultaneously measuring the 5-DOF synchronous and asynchronous error motions for a typical air bearing spindle at rotation speeds of 8.33, 108.33, and 308.33 rpm. The synchronous errors were nearly identical at various spindle speeds. However, because of system dynamics, increased vibrations were observed to be superimposed on the basic tilt error motions as the spindle speeds increased, which were verified by the vibration marks imprinted on the turned surfaces. For the 5-DOF motion measurements, the least-square fitting using large-volume edge and greyscale data of the captured image enabled super-high resolutions, despite using a camera with a relatively large pixel size and low bit depth. These results demonstrate that the proposed interference-enhanced micro-vision technique is a simple and effective tool for measuring spatial error motions in ultra-precision rotary axes.

Relative Movement Between Line of Sight and Light Axis of Imaging Seeker

Optical Design and accuracy analysis of interferometric star tracker

Line-of-Sight Angular Rate Estimation of Strapdown Optical Image Seeker

Line-of-sight Rate Estimation Based on the Tracking Differentiator for Roll-pitch Imaging Seeker

Performance Analysis of Motion Camouflage Guidance Law Against Maneuvering Target

Iterative Solution To Three-Dimensional Differential Geometric Guidance Problem

Influence Analysis of Tracking Seeker Component Imperfections to High Off-boresight Launch Missile

Joint Estimation of Suitable Imaging Time and Rotation Velocity for ISAR Maneuvering Target

Approach for space-based radar manoeuvring target detection and high-order motion parameter estimation

A Bearing-Angle Approach for Unknown Target Motion Analysis Based on Visual Measurements

Relative Motion Estimation Algorithm for Noncooperative Targets Considering Multiple Solutions of Rotational Parameters

Rotational Motion Estimation for ISAR Via Triangle Pose Difference on Two Range-Doppler Images

Non-cooperative target recognition and relative motion estimation with inertial measurement unit assistance

Measure Precision Analysis of Relative Movement Angles for Space Object Based on Spaceborne Electron-Optical Sensor

Variable Angular Rate Measurement for a Spacecraft Based on the Rolling Shutter Mode of a Star Tracker

A Missile-Borne Angular Velocity Sensor Based on Triaxial Electromagnetic Induction Coils

Angular velocity observer design using vector measurements with application to attitude tracking

Interference-enhanced micro-vision-based single-shot imaging of five degrees-of-freedom error motions for ultra-precision rotary axes

ISAR imaging of uniformly rotating targets via parametric matching pursuit

Kinematic model for the space-variant image motion of star sensors under dynamical conditions