Abstract:Journal of Circuits, Systems and Computers, Ahead of Print. The characteristics of automatic dependent surveillance-broadcast (ADS-B) technology, such as unencrypted channels and open data protocols, make it extremely vulnerable to various intentional or unintentional spoofing and jamming, which seriously threatens air traffic safety. Traditional approaches do not update their high-bit data for a long time, which causes the situations of the same encoding results to have different aircraft positions and it is difficult to determine the real position of the aircraft and effectively detect ADS-B jamming. Therefore, it is urgent to propose more effective detection methods for ADS-B spoofing and jamming. First, the methods and principles of frequency shift calculation and automatic monitoring algorithm are introduced. Then, signal consistency detection and error robustness are analyzed, and a track-data-based detection model for abnormal ADS-B data are proposed. The track-data-based detection methods can use multi-point sampling judgment algorithm to realize the reception and processing of data bits. This method makes full use of the information of multiple sampling values of each data bit and the reference power value obtained in the preamble detection, and determines the data value and confidence value through the relationship between the two. The detection methods for ADS-B spoofing and jamming distinguishes the true and false signals and the authenticity of target positions by comparing the arrival time difference of each signal at the ground station. Finally, the research results show that, with the increase of signal to noise ratio, no matter the estimation based on virtual array translation or the estimation based on circular stationary signal, their estimation accuracies are improved with gradually increasing trends.

ADS-B Double Intertwined Signal Separation Algorithm in Time Domain

An Enhanced Algorithm for Deinterleaving Mixed Radar Signals

A Dual-Hierarchy Synchronization Method for Signal Preambles with High Detection Rates for Satellite-Based ADS-B Receivers with Different Sensitivities

Mainlobe Jamming Suppression with Space–Time Multichannel Via Blind Source Separation

A New Radar Signal Multiparameter-Based Deinterleaving Method

An Algorithm of Radar Deception Jamming Suppression Based on Blind Signal Separation

Automatic Dependent Surveillance-Broadcast Deceptive Jamming Detection Method Based on Track Data

Optimization Research on Single-Channel Signal Separation of Automatic Identification System

Deep ToA Mask-Based Recursive Radar Pulse Deinterleaving

Separation and reconstruction method for BSS separated source signal blocks in time domain

Multi-mode Clutter Suppression of Multiple-Input–multiple-output Over-the-horizon Radar Based on Blind Source Separation

Multi-domain blind source separation in-band full-duplex technique considering RF impairments

Integrated Display and Simulation for Automatic Dependent Surveillance–Broadcast and Traffic Collision Avoidance System Data Fusion

Research on ADS-B spoof detection technology based on radio spectrum features

Simultaneous-Source Separation Using Iterative Seislet-Frame Thresholding

Simulation and Analysis for Overlapping Probability of ADS-B 1090ES Signal

An ADS-B Anti-counterfeiting System Based on TDOA

An Efficient Hybrid Jamming Suppression Method for Multichannel Synthetic Aperture Radar Based on Group Iterative Separation

An Improved Real-Time Echo Separation Processing Scheme in Intermediate Frequency Domain

Mainlobe Jamming Suppression Via Blind Source Separation

Deinterleaving of Pulse Streams With Denoising Autoencoders