Abstract:Alvarez-type Drift Tube Linacs (DTLs) are commonly adopted to accelerate the proton or heavy ion beam with the speed range about 0.04 similar to 0.4 times of the light speed in vacuum. Acquisition of appropriate frequency and distribution of the electromagnetic field, and the field stability inside the Alvarez-type DTL cavity are essential to achieve good beam characteristics. The field requirement can be achieved through tuning by tuners and post couplers when the cavity is off-line. The field stability of cavity is usually measured by the tilt sensitivity and the minimum frequency interval between the operation mode and the nearest neighbor mode. The frequency interval will increase with the reduction of the number of the acceleration units (cells) inside the cavity, which is beneficial to fulfill the tilt sensitivity requirement. If the field stability condition is naturally satisfied, the post couplers inside the DTL cavity are not needed, and the cavity frequency and field distribution can be tuned merely by tuners. In this paper, the tuning method based on the pseudo-inverse matrix is applied to the Alvarez-type DTL cavity without post couplers in Xi'an 200 MeV proton application facility (XiPAF). The method is improved by an expanded matrix algorithm and the tuning process is optimized to expedite the iteration during the tuning. The XiPAF DTL cavity has 23 cells and 5 tuners. By adjusting the insertion depths of the tuners, the tuning was achieved in merely one round of iteration. After tuning, the relative error of the peak field distribution and resonant frequency of the cavity reached to within +/- 3% and 325 +/- 0.007 MHz (25 degrees C, vacuum), respectively. It was verified that the field stability meets the requirement from the physical design both before and after tuning.

Beam transport tuning of Dragon-Ⅱ inj ector with thermal cathode

Beam Transport of 3.5 MeV Foilless Injector

Physics design of phase and energy adjustment for heavy ion beam of the same mass with two-charge state on BISOL

Measurement technology for electron beam envelope in anode pipe of Dragon-Ⅱ injector

Beam dynamics optimization in the LEBT of LLICTF

Beam Optics Analysis for the 120-keV Multiaperture Accelerator of Neutral Beam Injector

Dragon-Ⅱ accelerator and its key technology

Study on transient beam loading compensation for China ADS proton linac injector II

Measurements and Effects of Backstreaming Ions Produced at Bremsstrahlung Converter Target in Dragon-I Linear Induction Accelerator.

Beam Instabilities Measurement and Cures at HLS

Beam Emittance Investigation in High Brightness Injector Using Different Driver Laser Profiles

Transverse Profile Expansion and Homogenization at Target for the Injector Scheme-I Test Stand of China-ADS

Beam-energy-spread Adjustment Using Cell-Timing Asynchronization

Electron Transportation Experiment and Analysis for a G-Band Magnetron Injection Gun

RF measurement and tuning for an Alvarez-type drift tube linear accelerator without post couplers

Studies of the beam-ion instability and its mitigation with feedback system

Beam dynamics studies of the photo-injector in low-charge operation mode for the ERL test facility at IHEP

Beam Dynamics Optimization of Very-High-frequency Gun Photoinjector

Beam Transport Line of Ciae Medical Cyclotron and Its Magnetic Elements Design Studies

Field tuning study and RF electromagnetic design of a continuous-wave RFQ with ramped inter-vane voltage for AB-BNCT

Design of a Compact Beam Transport System for Laser-Driven Proton Therapy