Abstract:Parts with rapidly varied geometric features are usually crucial parts in high-end equipment and widely applied in the fields of aerospace, energy and power, which are difficult or inefficient to process because of the more special structure and the higher requirement of machining precision. High-speed machining technology provides an effective method for parts with rapidly varied geometric features to solve the contradiction between high demand and low machining efficiency. However, as the existence of rapidly varied geometric features, the machining toolpath for such parts is always complex free-form curve and the actual moving speed of the workbench of the NC machine tool cannot reach the feed-speed set in the NC program timely due to the drive constraint of NC machine tool. Furthermore, the machine tool would vibrate violently when machining the rapidly varied geometric features. In this way, the big machining error will be formed. A machining error reduction method by combining of feed-speed optimization and toolpath modification in high-speed machining for such parts is proposed. First, considering that the actual feed-speed cannot reach the programmed value when the toolpath curvature is too large, the feed-speed is optimized with the constraints of jerk and acceleration limitations of the feed shafts, and a feed-rate smoothing algorithm is applied. Then, the compensated cutter locations are calculated via machining-error estimation. Finally, the modified NC codes are acquired according to the optimized feed-speed and the compensated toolpath. By combining the feed-speed optimization and toolpath modification, the high precision and high efficiency machining can be realized. The experimental results demonstrate the feasibility of the proposed approach. This study provides an effective approach to reduce the machining error in high-speed machining, and is significant for improving the processing precision and efficiency of parts with rapidly varied geometric features.

High Performance Strategy for Die Cavity Machining Oriented to Tool Sequence

A Strategy of Toolpath Generation for Finish Machining of Mold Cavity Based on Tool-Zmap Model

A Computer Aided Tool Selection System For 3d Die/Mould-Cavity Nc Machining Using Both A Heuristic And Analytical Approach

An Effective Numerical Control Machining Process Optimization Approach of Part with Complex Pockets for Numerical Control Process Reuse.

A Cutter Screening Method for High Performance Tool Sequence Optimization of Pocket Rough Machining

Collaborative optimization of conical cutter sequence for efficient multi-axis machining of deep curved cavities

The Tool Paths Generation Approach Based on Level-Set Methods in Die-Cavities NC Machining

An Effective Adaptive Dynamic Evolution Computing Approach of Roughing Process for Part with Complex Pockets

Tool Orientation Sequence Smoothing Method Based on the Discrete Domain of Feasible Orientations

Machining Speed Enhancement for Free-form Surface of Cross-sectional Design Based on Step Length Optimization

A Feedrate Scheduling in Die-Cavity Roughing Based on Cutting Force Surface Model

Improving the Machining Dynamics Performance and Efficiency for Complex Channel Part Manufacturing by Planning the Tool Orientations and Feed Rate Sequence

Machining Error Reduction by Combining of Feed-Speed Optimization and Toolpath Modification in High-Speed Machining for Parts with Rapidly Varied Geometric Features

Optimization analysis considering the cutting effects for high-speed five-axis down milling process by employing ball end mill

Cutter Path Optimization During High-Speed Machining of Numerical Control

Machining Sequencing Optimization Based on Simulated Annealing Algorithm

Research on tool diameter and processing width optimization for highly efficient machining of complex surfaces constrained by machining interference surface

An Automated Approach to Calculating the Maximum Diameters of Multiple Cutters and Their Paths for Sectional Milling of Centrifugal Impellers on a 4½-Axis CNC Machine

An open-minded automatic feedrate adjustment method for die-cavity machining

A Novel Automatic Feedrate Adjustment Method for Die-Cavity Roughing

Efficient Machining of a Complex Blisk Channel Using a Disc Cutter