Abstract:Electrospinning technology was generally used to synthesis nanofiber, here we use it to fabricate pure ZnO nanoparticles (ZnO NPs) and Ce-doped (0.1 wt%, 0.8 wt%, 1.5 wt%) ZnO nanoparticles (ZnO:Ce NPs) via decrease the molecular weight of PVP in precursor liquid. Their microstructures were characterized by X-ray diffraction, scanning electron microscopy, Brunauer-Emmet-Teller and photoluminescence spectra. The results clearly indicated that the 0.8 wt% ZnO:Ce NPs shows smaller average grain size (70 nm) and a higher specific surface area (21.5 m(2)/g). The testing on gas sensing performance revealed that the 0.8 wt% ZnO:Ce NPs based sensor shows the highest response values and a well selectivity to acetone. The response and recovery time of ZnO NPs based sensors to 100 ppm acetone was about 13 and 7 s while these are about 10 and 9 s in ZnO:Ce NPs based sensors, respectively. These results demonstrated that the 0.8 wt% ZnO:Ce NPs based sensor can rapidly be detect and distinguish accurately acetone in ambient air. Moreover, the sensor shows good long-term stability and reproducibility of response. The sensing mechanism was also discussed and the results indicated that the gas diffusing channels and the electron depleted layer of the ZnO NPs based sensor was increased markedly after Ce-doped, which results in the response of the ZnO:Ce NPs based sensor increased. (C) 2015 Elsevier B.V. All rights reserved.

The Preparation and Acetone Gas Sensing Properties of ZnO Nanofiberstreated by Oxygen Plasma

Hollow WO3/SnO2 Hetero-Nanofibers: Controlled Synthesis and High Efficiency of Acetone Vapor Detection.

Porous Spheres-Like Zno Nanostructure As Sensitive Gas Sensors for Acetone Detection

Nickel-doped tin oxide hollow nanofibers prepared by electrospinning for acetone sensing

Highly Sensitive Acetone Sensors Based on Y-Doped Sno2 Prismatic Hollow Nanofibers Synthesized by Electrospinning

Synthesis and acetone sensing properties of Ce-doped ZnO nanofibers

Fabrication of a SnO2-based Acetone Gas Sensor Enhanced by Molecular Imprinting.

Porous ZnO Nanoparticles for Low‐Temperature, Specific and Selective Acetone Sensing

Electrospun SnO2/WO3 Heterostructure Nanocomposite Fiber for Enhanced Acetone Vapor Detection

Highly Sensitive Acetone Gas Sensor Based on Porous Znfe2o4 Nanospheres

Enhanced Acetone Sensing Characteristics by Decorating Au Nanoparticles on ZnO Flower-Like Structures

Enhanced Acetone-Sensing Performance of a Bilayer Structure Gas Sensor Composed of a ZnO Nanorod Top Layer and a ZnFe2O4 Nanoparticle Decorated ZnO Nanorod Bottom Layer

Synthesis of self-assembled spherical ZnFe 2 O 4 nanomaterials by the premixed stagnation flame method for highly sensitive acetone sensor

Ultra-sensitive Sensing Platform Based on Pt-ZnO-In2O3 Nanofibers for Detection of Acetone

Precise control of surface oxygen vacancies in ZnO nanoparticles for extremely high acetone sensing response

Preparation of ZIF-8/PAN composite nanofiber membrane and its application in acetone gas monitoring

Highly Sensitive and Selective Ethanol and Acetone Gas Sensors Based on Modified Zno Nanomaterials

ZnO Branched P-Cuxo @N-Zno Heterojunction Nanowires for Improving Acetone Gas Sensing Performance

Synthesis of Three-Dimensional Flower-Like Hierarchical ZnO Nanostructure and Its Enhanced Acetone Gas Sensing Properties

Influence of Ce Doping on Microstructure of Zno Nanoparticles and Their Acetone Sensing Properties

Construction of mesoporous WO3 nanofibers functionalized with nanoscale PtO catalysts for enhanced acetone sensing properties