Abstract:Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Ahead of Print. A simplified tire finite element model modeling and simulation method with high efficiency and accuracy is proposed to address the issues of poor efficiency and low accuracy in tire finite element simulation. Firstly, the detailed finite element model of the tire is established, and the viscoelastic material parameters are determined through theoretical analysis and simulation verification. Then, the Hyperelastic material parameters are obtained through cyclic Tensile testing, and finally, the static tire condition test verification is completed. Based on the established detailed finite element model of the tire, the influence of different rubber materials on the dynamic characteristics of the tire is studied. On this basis, simplified friction and structure models are proposed to complete the establishment of a simplified tire finite element model. The simulation results of lateral and longitudinal slip conditions are compared with experimental data by implanting a finite element friction model that considers slip velocity and contact pressure. Through simulation analysis, it was found that the tread compound has a significant impact on the dynamic characteristics of the tire, while other compounds have a relatively small impact. Simplifying the tire finite element model can significantly improve the efficiency of finite element simulation and reduce convergence issues. The comparison accuracy between the finite element model simulation results and experimental data is relatively high, with the average accuracy of longitudinal force, lateral force, and correction moment reaching 89%, 95%, and 81%, respectively. This verifies the correctness and effectiveness of the simplified tire finite element model modeling and simulation method. This method provides certain reference significance for improving the efficiency of tire finite element simulation and providing virtual matching between tires and the entire vehicle.

Vehicle Tire Forces Estimation Using a Novel Cascade Method

A Hierarchical Estimation Scheme of Tire-Force Based on Random-Walk SCKF for Vehicle Dynamics Control

A Universal Approach to Tire Forces Estimation by Accelerometer-Based Intelligent Tire: Analytical Model and Experimental Validation

Estimation of Vehicle's Vertical and Lateral Tire Forces Considering Road Angle and Road Irregularity

A Fusion Estimation of Tire Vertical Forces Using Model-Based Tire State Estimators for a Dual-Sensor Intelligent Tire

Vehicle State Observation Based on the Combined Estimation Method

A New Lateral Force Estimator for Intelligent Tires Based on Three-Dimensional Ring Model

Optimal allocation of tire force based on vehicle stability

Vehicle velocity estimation for real-time dynamic stability control

Adaptive Estimation of Vehicle Dynamics Through RLS and Kalman Filter Approaches.

Research on simplified tire finite element modeling and simulation method

A Volumetric-Based Tire Model For Both Longitudinal And Lateral Maneuvers

Simultaneous Estimation of Tire Side-Slip Angle and Lateral Tire Force for Vehicle Lateral Stability Control

Estimation of Vehicle Sideslip Angle and Individual Tyre-Road Forces Based on Tyre Friction Circle Concept

Real-time estimation and prediction of tire forces using digital map for driving risk assessment

A Data-Driven Framework for Tire Force Estimation of Distributed Electric-Drive Vehicles

Coordinated control of longitudinal/lateral/vertical tire forces for distributed electric vehicles

Estimation of Longitudinal Force, Sideslip Angle and Yaw Rate for Four-Wheel Independent Actuated Autonomous Vehicles Based on PWA Tire Model

Tire/Wheel Torsional Dynamic Behaviour and Road Friction Coefficient Estimation

Vehicle Lateral Velocity Observer Using Extended Kalman Filter

Vehicle Lateral Velocity And Tire-Road Friction Coefficient Estimation