Abstract:Great progress has been carried out on the Micro Total Analysis System (μTAS) in recent years, in which the chemical analysis system is miniaturized by micromachining. This system can reduce reagent consumption, dispersion effects and analysis time. Nowadays, μTAS devices are beginning to make significant contributions to biotechnology, biomedicine and drug discovery. Meanwhile, due to the difficulties of controlling fluid motion in such a small scale, fluid flow driven in microfluidic devices has received increasing attention. So far electroosmotic flow (EOF) is one of the most popular and important fluid driven techniques in microfluidic devices because in an EOF the velocity profile is plug-like and the mean velocity is independent of the cross-sectional area, as well as its valveless control of fluid flow. Therefore, electro-osmotic flow can offer significantly less deleterious dispersive effects than pressure-driven flow and provide a favored high-performance sample separation technique. Due to its importance, electroosmotic flow in microchannels has received considerable attentions recently and been investigated both numerically and experimentally. However, fluid flow in microfluidic devices is often through channels with changes in cross-sectional area, and/or channels with bends and bifurcations, which make a great difference to velocity profile, pressure distribution and so on. A systematic study of these different configurations will provide valuable insight into the flow physics. The goal of the present study is to undertake a numerical study of EOF in microchannels with a sudden expansion in order to identify the factors affecting the flow. The present work is in the use of an incompressible lattice-Boltzmann model with a forcing term which is perhaps better suited to microflows than the conventional Navier-Stokes solvers. The impact of expansion ratio (ER), ionic molar concentration (c ∞), external electric potential and zeta potential on the flows are investigated. Numerical results including velocity profile, pressure distribution and external electrical potential distribution have been presented. It has been shown that boundary layer separation has been suppressed by the electroosmotic force exerted on the fluid near walls. Moreover, a sudden change in the channel has a great influence on the electroosmotic flows. A jump has been found in fluid velocity, pressure drop at the junction, as well as electrical potential due to EDL. The external electrical potential is linear along the axis of the channel but a turning point emerges at the junction. Non-linear pressure drop in the narrow channel becomes more obvious as ER increases. Results also show that velocity profile at the outlet depends on ER and c ∞. The convex velocity profile turns to concave one as ER or c ∞ increases, resulted from interactions between adverse pressure gradient and electric force exerted on the fluid in the middle of channel.

A Simulation Research for Chaotic Micro Mixer Based on Lattice Boltzmann Method

Numerical simulation of fluid mixing reinforcement in micro-mixers with barriers embedded

Lattice boltzmann simulations of mixing enhancement by the electro-osmotic flow in microchannels

Three-dimensional simulation of mixing performance inside droplets in micro-channels by Lattice Boltzmann method

A Novel Passive Micromixer with Modified Asymmetric Lateral Wall Structures

Numerical Simulation on Fluid Mixing by Effects of Geometry in Staggered Oriented Ridges Micromixers

Benchmark Simulation of Laminar Reactive Micromixing Using Lattice Boltzmann Methods

Simulation of single-phase reacting flows in micro-channel reactors by Lattice Boltzmann method

Simulation of liquid mixing inside micro-droplets by a lattice Boltzmann method

Staggered Oriented Ridges Micromixer Based on Chaotic Advection

Simulation of velocity field inside the droplet in micro-channels by Lattice Boltzmann method

Numerical Simulation of Liquid Mixing Inside Soft Droplets with Periodic Deformation by a Lattice Boltzmann Method

Chaotic Mixing Characteristics of Micromixer Based on Lagrngian Tracking Method

Simulation of Reactive Mixing Behaviors Inside Micro-Droplets by a Lattice Boltzmann Method

LATTICE BOLTZMANN SIMULATION OF ELECTROOSMOTIC FLOWS IN MICROCHANNEL WITH A SUDDEN EXPANSION

Numerical Analysis on a Passive Chaotic Micromixer with Helical Microchannel

Numerical Simulation of the Efficiency of Mixing in Heterogeneous Microchannels with Patterned Surface Potentials

Theoretical And Experimental Aanalysis Of Chaotic Mixing Efficiency Of Plug Flow In Different Geometry

A Mathematical Model of Mixing Enhancement in Microfluidic Channel with a Constriction under Periodic Electro-Osmotic Flow

Numerical Study of Mixing Behavior with Chemical Reactions in Micro-Channels by a Lattice Boltzmann Method

Experimental and Numerical Research on the Flow in Microchannel with Barriers