Abstract:This study focuses on addressing kinematic singularity analysis and avoidance issues for a space station remote manipulator system (SSRMS)-type reconfigurable space manipulator. The manipulator is equipped with a non-spherical wrist and two lockable passive telescopic links (LPTLs), which enable it to have both active revolute and passive prismatic joints and operate in two distinct modes. To begin with the kinematic singularity analysis, the study derives the differential kinematic equations for the manipulator and identifies the dominant Jacobian matrix that causes singularities. Subsequently, an in-depth analysis of singularities from multiple perspectives is conducted. Firstly, a kinematic singularity map method is proposed to capture the distribution of singularities within the reachable workspace. Then, the influence of the two LPTLs on singularities is thoroughly examined. Finally, a new method based on the matrix rank equivalence principle is introduced to determine singularity conditions, enabling the identification of all the singular configurations for the SSRMS-type reconfigurable manipulator. Notably, this method significantly reduces computational complexity, and the singularity conditions obtained have more concise equations. For the singularity avoidance problem, a novel method is developed, which simultaneously addresses the requirements of real-time performance, high precision, and the avoidance of both kinematic singularities and joint limit constraints. Benefiting from these excellent properties, the proposed method can effectively resolve the singularity issues encountered separately by the SSRMS-type reconfigurable manipulator in its two operational modes. Several typical simulations validate the utility of all the proposed methods.

Study and Simulation of Manipulator Kinematic Solution at Singular Configurations

Dynamic Modeling and Analysis for Coupling Processing 6-DOF 3 P3 R Manipulator

Analysis of Singular Configuration of Robotic Manipulators

A Solution of Inverse Kinematics for 7-DOF Manipulators and Its Application

A Joint Physical Constraints Avoidance Method for Inverse Kinematics Problem of Redundant Humanoid Manipulator

Singularity Analysis and Avoidance for Robot Manipulators with Nonspherical Wrists.

A General Method for the Numerical Computation of Manipulator Singularity Sets

On the Virtual Joints for Kinematic Control of Redundant Manipulators with Multiple Constraints

Singularity Analysis of Lower-Mobility Parallel Manipulators Using Grassmann-Cayley Algebra

Singularity analysis and avoidance for an SSRMS-type reconfigurable space manipulator with a non-spherical wrist and two lockable passive telescopic links

Singularity analysis of a new parallel manipulator with revolute actuators

A study of the singularity locus in the joint space of planar parallel manipulators: special focus on cusps and nodes

A singularity handling algorithm based on operational space control for six-degree-of-freedom anthropomorphic manipulators

Singularity Analysis of the HALF Parallel Manipulator with Revolute Actuators

Analysis of the Singularity of Spatial Parallel Manipulator with Terminal Constraints

Analysis and Application of the Singularity Locus of the Stewart Platform

Analysis and treatment of singularity for a tomato harvesting manipulator

Sensor-Based Identification of Singularities in Parallel Manipulators

A New Approach for Singularity Analysis and Closeness Measurement to Singularities of Parallel Manipulators

The Free Mobility of a Parallel Manipulator

Kinematics of a 5-axis hybrid robot near singular configurations