Abstract:A proper orthogonal decomposition (POD) based hybrid surrogate model and the applications to transonic flow reconstructions are presented in the paper. In the implementations, the radial basis function (RBF) model response instead of the least-square linear regression is employed in order to improve the coefficients of POD basis modes; moreover, an adaptive sampling strategy with both the model response error and sample independence taken into account is studied to reduce the sample number, while maintaining sufficient response accuracy. Firstly, the POD-RBF surrogate model is studied and compared with the least-square-based POD through pressure reconstruction studies on the twodimensional blade surface. The results demonstrate that the non-linear model response method significantly improves the coefficients of the basis modes and thus the averaged description error. Meanwhile, the beneficial gains on the convergence performance of the response error versus the number of basis modes are obtained. Then by comparing with the uniform sampling and the resampling strategy with taking only the response error into account, the adaptive sampling method proposed in the paper obtains the best performance on reducing the averaged description error. Finally, the flow characteristics of the flow fields on the suction surface, at the blade tip, in the blade passage of the sampled three-dimensional transonic compressor rotor blades with different spanwise sweeps based on the baseline blade, NASA Rotor 67 are illustrated through the flow basis modes. Compared with the suction flow, the flow at the blade tip contains more intensive flow characteristics including shock, tip-leakage flow and shock-leakage interaction, resulting in a higher averaged description error. Besides, the missed flow fields in the passages of the test blades are reconstructed from the flow basis modes by using the adaptive POD-RBF hybrid model and the corresponding aerodynamic parameters are then predicted. The spanwise distributions of the circumferentially averaged aerodynamic parameters at the blade outlet reconstructed from POD-RBF model are consistent well with the numerical solutions. The results demonstrate that the adaptive POD-RBF hybrid surrogate model is effective and accurate enough for reconstructing the transonic flow. In order to further evaluate the response performance of the adaptive POD-RBF model, statistic analysis is carried out for a group of hybrid models with different sampling strategies and different numbers of samples. Generally, although the number of adaptive samples is much less, the mean value and standard deviation of the adaptive model are close enough to those of the static model with sufficient uniform samples. Besides, the standard deviations of a lot of aerodynamic parameters of interest exhibit significant peaks near the blade tip, further demonstrating that the flow at the blade tip is more intensive in the three-dimensional transonic rotor blade passage.

Model Reduction with Domain Decomposition to Predict Transonic Flow

A New Data Assimilation Method of Recovering Turbulent Mean Flow Field at High Reynolds Numbers

Transonic Flow Reconstruction by an Adaptive Proper Orthogonal Decomposition Hybrid Model

Flow Reconstructions and Aerodynamic Shape Optimization of Turbomachinery Blades by POD-based Hybrid Models

Parameter Optimization of Reduced Fluid Model Via Sparse Point Measurements.

An accuracy-enhanced transonic flow prediction method fusing deep learning and reduced-order model

A non-overlapping optimization-based domain decomposition approach to component-based model reduction of incompressible flows

An optimisation-based domain-decomposition reduced order model for parameter-dependent non-stationary fluid dynamics problems

Machine-Learning for Nonintrusive Model Order Reduction of the Parametric Inviscid Transonic Flow past an airfoil

An optimisation-based domain-decomposition reduced order model for the incompressible Navier-Stokes equations

Data-driven Construction of a Reduced-Order Model for Supersonic Boundary Layer Transition

Scaled-up prediction of steady Navier-Stokes equation with component reduced order modeling

Investigation on the Reduced-Order Model for the Hydrofoil of the Blended-Wing-Body Underwater Glider Flow Control with Steady-Stream Suction and Jets Based on the POD Method

Domain Decomposition Strategy for Combining Nonlinear and Linear Reduced-Order Models

Quantitative Evaluation of a Linear Reduced-order Model based on Particle-image-velocimetry Data of Separated Flow Field around Airfoil

Fluid Field Model Order Reduction Method for System-Level Simulation and Optimization

Domain Decomposition for Data-Driven Reduced Modeling of Large-Scale Systems

POD-based Reconstruction Field of Temperature in Navier-Stokes Flow

Transported snapshot model order reduction approach for parametric, steady-state fluid flows containing parameter dependent shocks

Data-driven reduced order modeling for parametrized time-dependent flow problems