Abstract:In the realm of dynamic separation problems, the motion of a body triggered by shock interactions is a common phenomenon. This is particularly important in terms of the safe separation of two-stage-to-orbit vehicles, where the motion must remain stable despite long-distance disturbances from shock waves. The flow field in these cases is complex, marked by interactions between hypersonic shock waves and a moving boundary. This leads to significant unsteady effects due to the body's translation and rotation over extended distances. Existing simulation techniques fall short in rapidly and accurately predicting the aerodynamic force and thermal properties for these problems, largely due to the overwhelming computational demands that result from oversize computational domains and the necessity of grid deformation. This paper presents a novel non-deforming grid method to address these challenges. The central concept is to anchor the reference frame to the moving object itself and to approach the problem from a non-inertial frame perspective. This accounts for the motion of the object solely via the inertial source term, circumventing the complexities of mesh manipulation typically required to link flow and motion equations. The moving shock boundary is designed to be closely compatible with selected shock-captured schemes, which reduces non-physical oscillations compared to the traditional method of direct assembly with theoretical shock relations. Other boundary conditions and the solution process are also refined to specifically target the unsteady, shock-dominated flow. These modifications significantly alleviate the computational burden. The effectiveness of the proposed method is demonstrated through several test cases. To showcase the method's practical application, a scenario is simulated wherein an ellipse is dislodged from a wedge by an incident shock wave, covering a long distance. These tests confirm the method's feasibility in aerospace engineering problems.

Trajectory Simulation of a Spinning Projectile Based on CFD/RBD Computation Method

Numerical Solution of the Aerodynamic Properties of the Rotating Projectiles

Numerical Investigation of Unsteady Aerodynamic Characteristics of A Pitching Missile

Unsteady aerodynamic modeling and flight trajectory simulation of dual-spin projectile based on DNN and transfer-learning

Computational Simulation of Reentry Flows over Hypersonic Vehicles Using Nonlinear Coupled Constitutive Relations

Optimal State Estimation of Spinning Ping-Pong Ball Using Continuous Motion Model

Unsteady Flow Simulation of a Variable-Sweep Morphing Aircraft Coupled with Flight Control System

Numerical Simulation of Sloshing in the Propellant Tank of Reusable Rocket Vehicle Using Meshfree Method

Direct Numerical Simulation of a Freely Falling Thick Disk

Simulation Analysis of Ballistic Trajectory of Projectile Based on Matlab

Coning Motion Analysis of Spinning Missile Based on Gyrodynamics

A Quasi-Dynamic Model for High-Speed Ball Spinning

Study on the coupling calculation method for the launch dynamics of a self-propelled artillery multibody system considering engraving process

Dynamics Characterization of Missiles with Control Flaps Based on CFD

Numerical Analysis of Small Caliber Spinning Projectile with Variety Boattail Configurations

Study on Characteristics of Dynamic Equilibrium Angle of the Spin-Stabilized Projectile

Two-Dimensional Numerical Simulation of Gas–Solid Reactive Flow with Moving Boundary

A numerical method for multi-body separation with collisions

Variable-structure trajectory correction control of small-caliber ammunition based on cascade fuzzy active disturbance rejection

Flight and bounce of spinning sports balls

Non-inertial Computational Framework for Long-distance Shock-driven Object Dynamics