Abstract:Hydrogen is a clean fuel widely used in fuel cells, engines, rockets and many other devices. The catalytic decomposition of methane (CDM) is a COx-free hydrogen production technology from which carbon nano materials (CNMs) can be generated as a high value-added byproduct for electrode, membranes and sensors. Recent work has focused on developing a low cost catalyst that could work without rapid deactivation by carbon deposition. In this review, the economic and environmental evaluation of CDM are compared with coal gasification, steam reforming of methane, and methanol steam reforming in terms of productivity, CO2 emissions, and H2 production and cost. CDM could be a favorable technology for on-site demand-driven hydrogen production on a small or medium industrial scale. This study covers the Fe-based, Ni-based, noble metal, and carbonaceous catalysts for the CDM process. Focusing on hydrogen (or carbon) yield and production cost, Fe-based catalysts are preferable for CDM. Although Ni-based catalysts showed a much higher hydrogen yield with 0.39 molH2/gcat./h than Fe-based catalysts with 0.22 molH2/gcat./h, the hydrogen cost of the former was estimated to be 100-fold higher ($0.89/$0.009). Further, the CDM performance on different types of reactors are detailed, whereas the molten-metal catalyst/reactor is suggested to be a promising route to commercialize CDM. Finally, the formation mechanism, characterization, and utilization of carbon byproducts with different morphologies and structures are described and analyzed. Versus other reviews, this review shows that cheap Fe-based catalysts (10 tons H2/1 ton iron ore) and novel molten-metal reactors (95% methane conversion) for CDM are feasible research directions for a fundamental understanding of CDM. The CNMs by CDM could be applied to the waste water purification, lubricating oils, and supercapacitors.

Research progress of hydrogen production by catalytic decomposition of methane over carbon catalysts

Catalytic carbon dioxide hydrogenation to methane: A review of recent studies

Production of hydrogen and value-added carbon materials by catalytic methane decomposition: a review

Mechanism of activated carbon-catalyzed methane decomposition process for the production of hydrogen and high-value carbon

Carbon–neutral hydrogen production by catalytic methane decomposition: a review

A review of catalyst modifications for a highly active and stable hydrogen production from methane

Catalytic Hydrogen Production from Methane: A Review on Recent Progress and Prospect

PROGRESS IN STUDY OF THE CATALYSTS FOR METHANE ACTIVATION AND CONVERSION

Electrocatalytic Conversion of Methane: Recent Progress and Future Prospects

Research progress of bimetallic catalysts for CO2 hydrogenation to methane

Methane Decomposition Over Modified Carbon Fibers as Effective Catalysts for Hydrogen Production

Methane catalytic cracking by solid materials and molten media for hydrogen production: A review

Experimental and Simulation Study on Coproduction of Hydrogen and Carbon Nanomaterials by Catalytic Decomposition of Methane-Hydrogen Mixtures

Hydrogen production via thermocatalytic decomposition of methane using carbon-based catalysts

NiFe/Al2O3/Fe-frame catalyst for COx-free hydrogen evolution from catalytic decomposition of methane: Performance and kinetics

Methane decomposition to pure hydrogen and carbon nano materials: State-of-the-art and future perspectives

H2 Production from Methane Reforming over Molybdenum Carbide Catalysts: from Surface Properties and Reaction Mechanism to Catalyst Development

H 2 Production from Methane Reforming over Molybdenum Carbide Catalysts: From Surface Properties and Reaction Mechanism to Catalyst Development

Research progress of methanol production via CO2 hydrogenation: Mechanism and catalysts

Recent Advances in Catalysts for Methane Combustion

Recent Progress of Metal-Oxide-Based Catalysts for Non-Oxidative Coupling of Methane to Ethane and Hydrogen