A numerical modelling approach to investigate the fate of brine reject of farm scale desalination plants on groundwater aquifers in arid environments
Amjad Aliewi,Harish Bhandary,Adnan Akber,Sabarithinam Chidambaram,Tariq Rashid,Habib Al-Qallaf,Ahmed Shishter,Bandar Al-Salman
DOI: https://doi.org/10.1016/j.scitotenv.2024.170967
IF: 9.8
2024-02-18
The Science of The Total Environment
Abstract:Farm-scale desalination units are gaining popularity for agricultural irrigation in arid countries, such as Kuwait to meet freshwater demands. However, less attention has been given to the management of environmentally hazardous brine reject water they produce. In this study we investigated the fate of brine water produced by the inland desalination units on the underlying aquifers using numerical modelling and field investigations. The methodology involved developing groundwater flow and solute transport models using Flex VMF-SEAWAT to simulate the movement of reject brine. The field investigations included collecting 150 water samples and conducting pumping tests on newly drilled wells. This numerical simulation considered advection, dispersion, and adsorption processes with variable groundwater density following rigorous validation and calibration of the developed numerical models. The results show that the RO reject brine will significantly increase groundwater salinity, exceeding 10,000 mg/L when accounting for advection, dispersion, and adsorption processes. The sustainable yield of the aquifer, with a salinity of <10,000 mg/L, averages 500 Mm 3 but is expected to be depleted within 16 years with the current extraction rate. The resulting hydraulic properties are favourable with K about 100 m/d, T > 1000 m 2 /day, and Sy just >0.1. The adopted values for dispersivity and adsorption coefficients for chloride and sulphate salts in the aquifer were 10 m and 1 × 10 −7 [mg/L] −1 respectively. Chemical and numerical analyses indicate a mixing ratio between the reject brine and groundwater in the study area of approximately 10 %. Uncontrolled groundwater extraction, combined with the surface disposal of RO reject brine, has led to a significant decline in groundwater levels and an increase in the salinity. The adsorption ratio of simulated brine plume was 13 %. The authors recommend to dispose the RO reject water in a safe location or transfer it to the nearest wastewater treatment plant for proper treatment and reuse.
environmental sciences