Abstract:Organic rankine cycle (ORC) has been regarded as the most promising measure for converting low-grade waste heat into electricity during the past decades. To take better advantage of ORC, the parameters of ORC and its heat integration with the background process streams should be optimized simultaneously. In this work, the decision variables of ORC not only include the operating temperature, pressure, and flowrate but also contain the type of working fluids. A set of 43 pure fluids and 36 binary mixtures are adopted from the literature as candidates for working fluids. In addition, both the supercritical and subcritical conditions of ORCs are involved. Background process streams and ORC streams with variable temperatures and flowrates are synthesized for heat integration. Such a complicated heat integration problem cannot be solved by traditional methods, where the temperature and flowrates of streams are fixed. We develop a two-level optimization strategy. The outer level identifies the promising working fluids and their compositions, temperatures, and pressures inside the ORC. The inner level deals with the heat integration problem, where the temperatures and flowrates of streams are the variables. The flowrate of ORC, the utility consumption, as well as area of heat exchangers are optimized in the inner level based on the vertical heat transfer assumption of pinch technology. The outer level is solved by a genetic algorithm, while the inner level is solved by a deterministic algorithm. Case studies show that the inner level model for heat integration is superior in both efficiency and quality of the solution. We also provide an overview of the best ORC selection for a single waste heat source between 100 and 300 degrees C and show applicability for the integration of ORC and background processes with multiple streams in case studies.

Inter-plant waste heat integration for industrial park using two medium fluids

Indirect Heat Integration Across Plants: Novel Representation of Intermediate Fluid Circles

Transshipment Type Model for Total Site Heat Integration Using Non-Isothermal Utility Loop

Recent Progresses on Optimal Design of Heat Integrated Water Allocation Network

Efficient Strategy for the Synthesis of Work and Heat Exchange Networks

Energy and Water Management for Industrial Large-Scale Water Networks: A Systematic Simultaneous Optimization Approach

Transshipment Type Heat Exchanger Network Model for Intra- and Inter-Plant Heat Integration Using Process Streams

Targeting and Design of Work and Heat Exchange Networks

New Transshipment Type MINLP Model for Heat Exchanger Network Synthesis

Design Energy Efficient Water Utilization Systems Allowing Operation Split

Targeting of Heat Integrated Water Allocation Networks by One-Step Milp Formulation

Simultaneous Optimization of Heat-Integrated Water Allocation Networks Using the Mathematical Model with Equilibrium Constraints Strategy

Optimization of Organic Rankine Cycle Involving Operating Conditions and Work Fluids and Heat Integration

Simultaneous Optimization for Organic Rankine Cycle Design and Heat Integration

Method for Integrating Low-Grade Industrial Waste Heat into District Heating Network

Optimization of Heat Recovery Networks for Energy Savings in Industrial Processes

An enhanced superstructure-based model for work-integrated heat exchange network considering inter-stage multiple utilities optimization

Simultaneous design of heat integrated water allocation networks considering all possible splitters and mixers

An Operation Strategy for Using a Ground Heat Exchanger System for Industrial Waste Heat Storage and Extraction

Optimal Process Design for Recovering Effluent Gas at Subambient Temperature

Simultaneous optimization of heat-integrated water allocation networks