Abstract:Coke-oven gas that contains mainly 57-62% H2, 25-28% CH4, and ∼6% CO is a a high quality hydrogen resource. However, coke-oven gas that contains more organic sulfur such as COS, thiophene S, and more tar can not be converted into syngas easily by Ni-catalyst process. Based on this limitation a new kind of catalyst, carbon catalyst for reforming CH4.in coke-oven gas to syngas was studied. The research of CH4-H2O (in coke-oven gas) reforming was taken in a Plug Flow Reactor (PFR). The research indicated that: 1) in the uncatalyed CH4-H2O reforming, the conversion rate of CH4 is lower. At the reaction temperature of 1100°C the conversion rate is about a half. However, in the carbon-catalyzed CH4-H2O reforming, the conversion rate of CH4 at 1100 is 97.4 %. The carbon catalyst can accelerate the reaction of CH 4-H2O reforming; 2) In the process of CH 4-H2O reforming, the reaction of water gas shift happened because of the existence of H2O and the component contents of the product gas have been changed. At lower temperatures, the water gas shift reaction has the trend of reduce the content of CO and increase the content of H2 in the product gas; 3) Because of the existence of water gas shift reaction, in the CH4-H2O reforming reaction, as the ratio of H 2O/CH4 was towards 1, the content of methane in coke-oven gas appeared towards highest; At 1200, with the staying time 0.5 seconds, the methane conversion rate in carbon catalyzed reaction is 85.5%. When the resident time lengthens to 1 second, the conversion rate of methane in coke-oven gas can reach above 95.0%. 4) At the temperature about 1000 carbon catalyst shows the catalytic activity on water gas shift reaction. When the reaction temperature reaches above 1050°C, the amount of CO2 will rapidly decrease to below 0.5%. This could be due to that at the temperature, the reaction between C and CO2 could rapidly increase, i.e. the CO2 from shifting reaction reacts with the C in catalyst, rapidly decreasing CO 2 contents. 5) The result of element analysis and specific surface area analysis of the carbon catalyst indicated that the contents of S and N in the carbon catalyst decreased sharply and the pore specific volume and the surface area increased after the reaction of CH4-H2O reforming.

Water consumption and transfer during MSW pyrolysis char-vaporized pyrolysis oil reforming process

Analysis on low-temperature polyethylene pyrolysis and gasification in different atmospheres

MSW pyro-gasification using high-temperature CO 2 as gasifying agent: Influence of contact mode between CO 2 , char and volatiles on final products

Upgrading gas and oil products of the municipal solid waste pyrolysis process by exploiting in-situ interactions between the volatile compounds and the char

Effect of Moisture Content on the Characterization of Products from the Pyrolysis of Sewage Sludge

Sewage sludge pyrolysis coupled with self-supplied steam reforming for high quality syngas production and the influence of initial moisture content

Thermal Characteristics of Biomass Pyrolysis Oil and Potential Hydrogen Production by Catalytic Steam Reforming

Supercritical water pyrolysis of sewage sludge

Distribution of gasification products and emission of heavy metals and dioxins from municipal solid waste at the low temperature pyrolysis stage

Study of CH4-H2O in coke-oven gas reforming to produce syngas catalyzed by carbon catalyst

Effect of Hot Char and Steam on Products in Waste Tire Pressurized Pyrolysis Process

In-situ Decoupling Effect of H2O on the Whole Process of Coal Gasification in MFBRA and TG-FTIR-MS

The mechanism of superheated steam affecting the quality of in-situ pyrolysates of oil shale kerogen: Part A-saturation of pyrolytic organics

Experimental Studies on Thermal Effect of H2O on the Combustion of Pulverized Coal Char

Insights into Co-Pyrolytic Behavior, Emission, Kinetics, Synergy of Bio-Oil Distillation Residue and Waxy Product Via TG-FTIR-MS

Dealkylation of Aromatics in Subcritical and Supercritical Water: Involvement of Carbonium Mechanism

Pyrolysis of typical solid wastes in a continuously operated microwave-assisted auger pyrolyser: Char characterization, analysis and energy balance

Thermal Evolution of Gas-Liquid-solid Products and Migration Regulation of C/H/O Elements During Biomass Pyrolysis

Optimization of Operating Parameters for Tar Reforming/hydrogen Upgrading in Corn Straw Pyrolysis Polygeneration

TGA Pyrolysis and Gasification of Combustible Municipal Solid Waste

Formation of H2O in the CH4-CO2 dry reforming process and its activation to this reaction over Ni-Fe/MC12A7 catalysts