Abstract:The phase change material (PCM) cooling system is considered a promising battery thermal management system due to its high energy conservation and simple structure. However, its development is restricted to the low thermal conductivity of PCM and the difficulty in heat dissipation over time. And the applicable border of the PCM cooling system is also unclear. This paper gives a comprehensive study and optimization design of a hybrid cooling system combining the composite PCM and flat heat pipe (composite PCM-HP) for the actual application. The thermal performance and applicable border of this hybrid system were investigated through orthogonal tests. The experimental results show that composite PCM (CPCM) system and composite PCM-HP hybrid system can control temperature rise and uniformity well. Compared to the thermal performance of the air-cooling system, the maximum temperature in the hybrid system is 22 °C lower when it is discharged at a 2C rate under 25 °C. The applicable border of the hybrid system is tested at a 2C discharge rate under 40 °C, where the maximum temperature exceeds the allowable temperature range. The flat heat pipe presents excellent auxiliary heat dissipation for CPCM in the cycling tests at 40 °C, which makes the maximum temperature 10 °C lower than the CPCM system and 15 °C lower than the air-cooling system. A lumped thermal model for the hybrid system was developed and validated and further analyzed the effects of the dimension size, the porosity of copper foam, and the convective heat transfer coefficient on thermal performance. In light of the permitted temperature range, volume energy density, cooling performance, and operational circumstance, the best designs for these criteria are recommended.

Battery thermal management system using phase change materials and foam copper

Performance Analysis of a Novel Thermal Management System with Composite Phase Change Material for a Lithium-Ion Battery Pack

Experimental Study of Battery Passive Thermal Management System Using Copper Foam-Based Phase Change Materials

Design And Thermal Analysis Of A Passive Thermal Management System Using Composite Phase Change Material For Rectangular Power Batteries

Parameter optimization and sensitivity analysis of a Lithium-ion battery thermal management system integrated with composite phase change material

Thermal Conductivity Enhancement and Thermal Saturation Elimination Designs of Battery Thermal Management System for Phase Change Materials Based on Triply Periodic Minimal Surface

Experiment and simulation of a LiFePO4 battery pack with a passive thermal management system using composite phase change material and graphite sheets

Study of a novel thermal management system using double-layer liquid-cooled plate-coupled PCM under high-rate discharge

Investigation on Heat Transfer Enhancement of Phase Change Material for Battery Thermal Energy Storage System Based on Composite Triply Periodic Minimal Surface

Composite phase change materials with carbon foam and fibre combination for efficient battery thermal management: Dual modulation roles of interfacial heat transfer

Performance of a liquid cooling‐based battery thermal management system with a composite phase change material

Thermal management analysis of simulative power batteries using phase change material and flat heat pipe

Thermal Management of Power Batteries for Electric Vehicles Using Phase Change Materials: A Review

Optimization of heat transfer and temperature control of battery thermal management system based on composite phase change materials

Experimental and numerical study on the cooling performance of heat pipe assisted composite phase change material-based battery thermal management system

Research on novel battery thermal management system coupling with shape memory PCM and molecular dynamics analysis

A parametric study of a hybrid battery thermal management system that couples PCM/copper foam composite with helical liquid channel cooling

A comprehensive review of composite phase change material based thermal management system for lithium-ion batteries

Design of battery thermal management system based on phase change material and heat pipe

Experimental Study of a Passive Thermal Management System Using Expanded Graphite/Polyethylene Glycol Composite for Lithium-Ion Batteries

Battery thermal management systems (BTMs) based on phase change material (PCM): A comprehensive review