Abstract:Polypropylene is one of the well-known and multi-use thermoplastic materials because of its distinctive mechanical properties. On the other hand, it has deficiencies in the impact property at low temperatures. Several methods have been proposed and introduced to improve and overcome such deficiencies; one of them is the combination of isotactic homopolymer polypropylene and ethylene-propylene random copolymer (EPR) with a high ethylene content, which is usually created by consecutive polymerization in at least two reactors, to form a polymer called impact copolymer polypropylene (ICP). The distinctive properties of this type of ICP polymer made it an important material in various fields. The standard polypropylene impact copolymer, or "ICP," is created as described above with a high ethylene content. However, the markets for these applications are calling for better levels of performance than those offered by PP homopolymer "HPP". Notwithstanding the benefits of ICPs over HPP, there may be even more particular requirements for ICP features such impact/stiffness balance (I/S) and others, depending on the ultimate application. The maximum EPR level and highest isotacticity from the homopolymer continuous phase to manage the I/S balance, however, are both constrained by existing technology. The majority of earlier studies attempted to improve the ICP by melt blending it with materials that had the desired qualities, ideally materials from the same family, such as polyolefin or other families. In this study, ICP and PP homopolymer have been blended in a variety of ways and using the same weight percentages (Wt%). Different HPP grades with different melt flow, i.e., molecular weights, were utilized as a discontinuous phase in the final blend at a level of about 0.25%. Different ICP grades with varying ethylene-rubber phase and molecular weight were used as the continuous phase. The final blends were compounded, pelletized, and injection molded to manufacture finished components and/or samples for laboratory testing and analysis. Surprisingly, it has been discovered that discontinuous phases with varying molecular weights from the same family can operate as impact boosters or "plasticizer" at levels below 0.5% weight to enhance the impact resistance. Additional details on the improved sample, with different percentage of blends such as 0.5% and 1%, have been performed to investigate whether a further change in mixture composition could further improve the impact strength properties; the obtained values confirm that the improvement occurs when the level of the particular minor phase, i.e., HPP, is below 5 wt.%. The acquired findings were assessed and concluded that, for a given formulation, they revealed a well-dispersed rubber composition and consistent particle size distribution, which clearly improved the impact resistance by around 33% above the value of the virgin ICP.

Preparation of high impact polypropylene with high ethylene content by gas phase process

Enhanced Multiphase Interfacial Interaction of Impact Polypropylene Copolymer by In-Situ Introducing Polyethylene

Branched-PE/i-PP reactor blends prepared through ethylene gas-phase polymerization catalyzed by α-diimine nickel supported on iPP particles

A Convenient, Highly-Efficient Method for Preparation of Hydroxyl-Terminated Isotactic Poly（propylene） and Functional Di-Block Copolymer

Studies on composition and molecular structure of high impact polypropylene

Progress in analysis of structure and properties of hiPP

Multilayered Core–shell Structure of the Dispersed Phase in High‐impact Polypropylene

Preparation of high melt strength polypropylene by the reactive extrusion process and its foaming application

Evolution of Phase Morphology of High Impact Polypropylene Particles Upon Thermal Treatment

Synthesis and Characterization of High‐density Polypropylene‐grafted Polyethylene Via a Macromolecular Reaction and Its Rheological Behavior

Mass Transfer Resistance in the Production of High Impact Polypropylene

Effect of the synergistic interaction of zinc adipate, hydrotalcite and ethylene propylene rubber on the performances of polypropylene

Improving of impact copolymer PP (ICP) blends properties via compounding

Crystallization kinetics and morphology of high impact polypropylene

The Functions of Crystallizable Ethylene‐propylene Copolymers in the Formation of Multiple Phase Morphology of High Impact Polypropylene

One-Pot Interfacial Polymerization to Prepare Polyhipes with Functional Surface

Morphology of high impact polypropylene particles

Enhancing Mechanical Performance of High-Lignin-Filled Polypropylene via Reactive Extrusion

Development of β-PPH resin in a gas-phase polypropylene plant

Versatile Polypropylene Copolymers from a Pilot-Scale Spheripol II Process

Study on High Weld Strength of Impact Propylene Copolymer/high Density Polyethylene Laminates