Abstract:On the basis of previous experimental studies of two-phase flow condensation heat transfer for R134a inside the horizontal micro-fin tubes, a theoretically analysis of heat transfer characteristic combining both heat transfer mechanism and flow mechanism is discussed by the experimental data of heat transfer coefficient and pressure drop, to further clarify the influence of experimental condition and tube structure on heat transfer characteristics under the special working condition. Two performance factors, enhancement factor (EF) and penalty factor (PF), are introduced to quantitatively compare the effect of micro-fin on the heat transfer coefficient and the pressure drop between enhance tube and smooth tube. Meanwhile, the comprehensive factor, CHF, is applied to evaluate the comprehensive performance of heat transfer tube. It was found that enhancement factor (EF) and penalty factor (PF) both increase with increasing mass flux and fin helical angle, and decreasing saturation temperature, the comprehensive factor, CHF, is always greater than one and increases with increasing fin helical angle and mass flux, and decreasing saturation temperature. Moreover, based on the comparative analysis findings that some existing correlations of heat transfer characteristics underestimate most of the experimental data, and the experimental variable has great influences on the correlation prediction accuracy, such as mass flux, which is proportionate to the prediction deviation of correlation. Therefore, a new correlation was developed through analyzing quantitatively influencing mechanism of the experimental variable on the heat transfer characteristics, in a way that a two-phase frictional multiplier is defined firstly from the experimental data and then the forced convection heat transfer mechanism is redefined based on the comprehensive effect of various experimental variables. By the experimental data verification, the new correlation shows good prediction effect with the mean deviation of less than 5%.

Frictional and local pressure drops in waste heat recovery boiler of split shell-tube structure

Frictional Resistance Investigation of Sco2 and a Semi-Empirical Friction Factor Correlation Based on Wall-of-the-law

Theoretical and Experimental Analyses of Two-Phase Flow Condensation Heat Transfer Inside the Horizontal Micro-Fin Tube

Numerical Investigation of Shell-Side Flow Behavior and Vapor Distribution in Waste Heat Boilers

Experimental investigation on spatial phase distributions for various flow patterns and frictional pressure drop characteristics of gas liquid two-phase flow in a horizontal helically coiled rectangular tube

Relationship between fluctuating differential pressure and void fraction of gas-liquid two-phase flow in Venturi tube

Flow Pattern Study and Pressure Drop Prediction of Two-Phase Boiling Process in Different Surface Wettability Microchannel

Dynamic Pressure Drop Property of Gas-Liquid Two-Phase Flow around a Horizontal Cylinder

Investigation of Bubble Interaction in a Temporal and Spatial Heat Flux Partitioning Model for Subcooled Flow Boiling

Frictional Pressure Drop Correlation of Steam-Water Two-Phase Flow in Helically Coiled Tubes

Experimental Study of Flow Boiling Instabilities in Horizontal Tubes under Gas–liquid Stratification Condition: Effects of Heat Flux and Inlet Subcooling Degree

Visualized Investigation of Gas–liquid Stratified Flow Boiling of Water in a Natural Circulation Thermosyphon Loop with Horizontal Arranged Evaporator

R410A flow boiling in horizontal annular channels of enhanced tubes, part I: Pressure drop

Experimental Study and Correlation Development for the Two-Phase Frictional Pressure Drop of Flow Boiling in Copper Foam Fin Microchannels

Experimental Study of Evaporation Frictional Pressure Drop in Horizontal Enhanced Tube

Comparison of two-phase empirical multiplier correlations for high pressure steam-water mixtures flowing upward in a vertical smooth tube

A GENERAL CORRELATION FOR FRICTIONAL PRESSURE DROP OF FLOW BOILING IN PLATE HEAT EXCHANGERS

Pressure drop characterization on cryogenic multiphase flow in spiral wounded heat exchanger under high mass flow conditions

Numerical study of heat transfer and pressure drop characteristics in helical tubes based on OpenFOAM

Frictional Pressure Drop During Flow Boiling in Micro-Fin Tubes: A New General Correlation

Evaluation of Two-Phase Frictional Pressure Drop Correlations Against Experimental Data