Influence of aeration intensity on phosphorus removal granules in SBR

李冬,吕育锋,张金库,范丹,姜沙沙,曾辉平,张杰
DOI: https://doi.org/10.11949/j.issn.0438-1157.20150941
2015-01-01
Abstract:Three column sequencing batch reactors (SBR) (R1, R2 and R3) were operated under various aeration intensity of 0.5, 1.0 and 1.5 L·min-1, respectively. The influence of aeration intensity on characteristics, treatment performance and biomass of the phosphorus removal granules (PRGs) were investigated. PRGs were formed in all reactors in 30 days and operated steadily for another 30 days. The results showed that the aeration intensity had an important impact on the settling ability, particle size, morphology, moisture content, treatment performance and biomass. With the increase of aeration intensity, the diameter and settling velocity of matured granules were increased, which were 900μm and 24—144 m·h-1, 1000μm and 29—162 m·h-1, and 1150μm and 33—178 m·h-1in R1, R2 and R3, respectively, while the moisture contents were decreased and were 95.6%, 94.2% and 93.4%, respectively. Therefore, compared with the low aeration intensity, the PRGs under the higher aeration intensity had better physical characteristics, settling ability and treatment performance due to the more biomass and denser structure. PRGs under higher aeration intensity were spherical or elliptic and had regular contours, but the structure and shape of PRGs under lower aeration intensity was loosened and irregular. Meanwhile, the MLVSS/MLSS, biomass layer thickness of PRGs and P release/COD uptake ratios in all reactors at the 51th day were calculated. MLVSS/MLSS and biomass layer thickness of granules in R1, R2 and R3 were 78% and 0.34 mm, 82% and 0.35 mm, and 86% and 0.38 mm, respectively. It demonstrated that granules in the reactor with higher aeration intensity had a relatively thicker biomass layer and more biomass. The P release/COD uptake ratios in R1, R2 and R3 were 0.35, 0.35 and 0.36, respectively, indicating that the content of phosphorus accumulating organisms (PAOs) was high in all reactors of this research.
What problem does this paper attempt to address?