EFFECTS OF FENTON-LIKE REAGENT AND PFS ON SLUDGE DEWATERING PERFORMANCE
Hai-pan WANG,Xing-qiu ZHOU,Jian-dong WU,Shao-ting MO,Qing-yang ZENG
DOI: https://doi.org/10.13205/j.hjgc.201703030
2017-01-01
Environmental engineering
Abstract:Fenton-like reagent and PFS were investigated for sludge dewatering with combined conitioning,and the moisture content and SRF were the major parameters to evaluate the sludge dewatering performance.Then the response surface methodology optimized the sludge dewatering conditions.Several other parameters were used to analyze the conditioning mechanism,such as soluble COD,extracellular polymeric substance,protein and polysaccharide contents in the filtrate,and the sludge partical size and Zeta potential.The results showed that combined conditioning using Fenton-like reagent and PFS could improve the sludge dewatering performance.When the initial pH was 2.98,and the dosage of Co2+,H2O2 and PFS were 10.44,59.45,48.63 mg/g(dry solids),respectively,the slduge dewateralibity was best.Under the conditions,the moisture content and the SRF decreased from raw sludge's 79.77％,1.17 × 1013 m/kg to (63.12 ± 0.5)％ and (5.32 ± 0.29) × 1012 m/kg,respectively.After the Fenton-like reagent's treatment,the partical size became the smallest,and the sludge flocs stucture were damaged,so that more bound water and intracellular water was released,and the sludge dewatering performance was improved.Then after the PFS treatment,the crushed sludge flocs flocculated again forming new dense folocs and the performance of sludge dewatering was improved greatly.Meanwhile,the partical size and Zeta potential incresed at the same time,which meant that the mechanism of re-flocculation process was dominant in charge neutralization.