Abstract:Polymer nanocomposite (PNC) films consisted of poly (methyl methacrylate) (PMMA) matrix and wide energy bandgap semiconductor nanocrystallite fillers viz. zinc oxide (ZnO), tin oxide (SnO2), and titanium dioxide (TiO2) were prepared by a sonicated suspension of nanoparticles in polymeric solutions followed by the casting method. The X-ray diffraction (XRD) and scanning electron microscopy (SEM) characterization revealed successful nanocomposite formation of these hybrids. The ultraviolet–visible (UV–Vis) spectroscopic study explained that the absorbance and energy bandgap of these PNC films largely differed with the type of metal oxide nanofillers and their concentrations (i.e., 1–5 wt%). The UV-absorbance was found relatively high for the PMMA/TiO2 films and low for the PMMA/SnO2 films at the same concentration of the fillers. The film thickness dependent study confirmed that the increase of film thicknesses significantly enhanced the UV–Vis absorbance and reduced the energy bandgaps of the same composition PMMA/TiO2 composites. The dielectric permittivity of the ZnO and SnO2 containing PNC films was found to be appreciably increased with the increase of concentration of these nanocrystallite fillers, whereas the films bearing TiO2 nanoparticles exhibited a decrease in permittivity as compared to that of the host PMMA matrix film at the temperature of 30 °C. Further, a gradual decrease in the permittivity of these nanocomposite materials was noted with the increase of experimental electric field frequency from 20 Hz to 1 MHz range. The electric modulus spectra exhibited a single relaxation process in the lower frequency region which attribute to the ester group rotations of the PMMA chain repeat units and it was found to be largely influenced by the fillers and their concentrations in these nanocomposites. The AC electrical conductivities of all these PNC films were observed slightly increased and showed a linear behaviour with the frequency variation. The wide range tailorable behaviour of the optical and dielectric parameters with the change of nanofillers and their concentrations evidence that these PNCs could be promising multifunctional materials for UV-shielders, optical sensors, and bandgap tuners in developing various advanced optoelectronic and organoelectronic devices, and also their use as low permittivity nanodielectric insulators and substrates to architect the next-generation flexible-type electronic devices.

Research Progress in Multi-functional PMMA/ZnO Nano-composites

The Preparation And Characterization Of Zns/Pmma Nanocomposites

Organic/Inorganic Nanocomposites of Zno/Cuo/Chitosan with Improved Properties

Interface Optimization of Metal Quantum Dots/Polymer Nanocomposites and Their Properties: Studies of Multi-Functional Organic/Inorganic Hybrid

Preparation of Low-Dimensional Carbon Nanomaterials and Its Improvement of Visible Light Activity

Synthesis at the Nanoscale of ZnO into Poly(methyl Methacrylate) and Its Characterization

Effect of the Laser Radiation on the Photoluminescence of CdSe/PMMA Nanocomposites

Fabrication of PMMA/ZnO nanocomposite: effect of high nanoparticles loading on the optical and thermal properties

Research progress on magnetic-fluorescent different rare-earth fluorescent host-based nanocomposites

Synthesis, optoelectronic and thermal characterization of PMMA-MWCNTs nanocomposite thin films incorporated by ZrO2 NPs

Optical and UV Shielding Properties of Inorganic Nanoparticles Embedded in Polymethyl Methacrylate Nanocomposite Freestanding Films

First Principles Calculations of Electronic, Structural and Optical Properties of (PMMA–ZrO2–Au) and (PMMA–Al2O3–Au) Nanocomposites for Optoelectronics Applications

Polymer nanocomposites comprising PMMA matrix and ZnO, SnO2, and TiO2 nanofillers: A comparative study of structural, optical, and dielectric properties for multifunctional technological applications

Structural, Spectroscopic, Electronic and Optical Properties of Novel Platinum Doped (PMMA/ZrO2) and (PMMA/Al2O3) Nanocomposites for Electronics Devices

Fabrication and Characterization of PMMA/MWCNTs Composite Materials

Study of Property of Nano-ZnO/PP and ZnO/CaCO3/PP Composites

Monodispersed ZnO Nanoparticle-Poly(methyl methacrylate) Composites with Visible Transparency for Ultraviolet Shielding Applications

Preparation and Properties of Electrospun Sheath-core Modified-PMMA Nanofibers with Photoluminescence and Photochromic Functions

PMMA-, PAN-, and Acrylic-Based Polymer Nanocomposites

Synthesis and Characterization of PMMA/CdSe Nanocomposites Parpared by in Situ Bulk Polymerization

Preparation and optical properties of ZnO/ZnS heterostructured nanomaterials