Abstract:The present work proposes to investigate the effect of an ultrahigh molecular weight silicone rubber (UHMW-SR) and two ethylene methyl acrylate copolymers (EMA) with different methyl acrylate (MA) content on the mechanical and fire performance of a fireproof acrylonitrile butadiene styrene copolymer (ABS) composite, with an optimum amount of ammonium polyphosphate (APP) and aluminum diethyl phosphinate (AlPi). ABS formulations with a global flame retardant weight content of 20 wt.% (ABS P) were melt-compounded, with and without EMA and UHMW-SR, in a Brabender mixer. During this batch process, ABS P formulations with UHMW-SR and/or EMA registered lower torque values than those of ABS P. By means of scanning electron microscopy (SEM), it was possible to observe that all ABS composites exhibited a homogenous structure without phase separation or particle agglomeration. Slightly improved interfacial interaction between the well-dispersed flame-retardant particles in the presence of EMA and/or UHMW-SR was also noticed. Furthermore, synergies in mechanical properties by adding both EMA and UHMW-SR into ABS P were ascertained. An enhancement of molecular mobility that contributed to the softening of ABS P was observed under dynamic mechanical thermal analysis (DMTA). An improvement of its flexibility, ductility and toughness were also registered under three-point-bending trials, and even more remarkable synergies were noticed in Charpy notched impact strength. Particularly, a 212% increase was achieved when 5 wt.% of EMA with 29 wt.% of MA and 2 wt.% of UHMW-SR in ABS P (ABS E29 S P) were added. Thermogravimetric analysis (TGA) showed that the presence of EMA copolymers in ABS P formulations did not interfere with its thermal decomposition, whereas UHMW-SR presence decreased its thermal stability at the beginning of the decomposition. Although the addition of EMA or UHMW-SR, as well as the combination of both in ABS P increased the pHRR in cone calorimetry, UL 94 V-0 classification was maintained for all flame-retarded ABS composites. In addition, through SEM analysis of cone calorimetry sample residue, a more cohesive surface char layer, with Si-O-C network formation confirmed by Fourier transform infrared (FTIR), was shown in ABS P formulations with UHMW-SR.

Study on Halogen-free Flame Retardant ABS/IFR/Hollow Bead Composite Toughened by Elastomer

Preparation of High-Impact ABS with Flame Retardance

PREPARATION AND PROPERTY OF INTUMESCENT HALOGEN-FREE FLAME RETARDANT ABS

Synergistic effect of zinc borate in intumescent halogen-free flame retardant ABS composite

Effect of Modified Intumescent Flame Retardant via Surfactant/Polyacrylate Latex on Properties of Intumescent Flame Retardant ABS Composites

Effect of an Ultrahigh Rubber Abs Impact Modifier Resin on Mechanical Properties of Intumescent Flame-Retardant Abs Composites

Thermal Degradation and Combustion Behavior of a Modified Intumescent Flame-retardant ABS Composite

The Analysis of Synergistic Effects of Zeolites Applied in Intumescent Halogen-Free Flame-Retardant Abs Composites

Research of Flame Retarding Behaviours and Mechanical Properties of ABS Composites

Development of Halogen‐Free Flame Retardant Acrylonitrile Butadiene Styrene (ABS) Based Composite Materials

Preparation and Flame Retardancy of No-halogen Flame-retardant ABS Composite

Synergistic Effect of Montmorillonite and Intumescent Flame Retardant on Flame Retardance Enhancement of Abs

Combined Effects Of Layered Nanofillers And Intumescent Flame Retardant On Thermal And Fire Behavior Of Abs Resin

Improving the Fracture Toughness, Flame Retardancy and Smoke Suppression of ABS by Core-Shell Elastic Flame Retardant Particles with P/Si Synergistic Effect

Study on Microstructure of Inorganic Halogen-free Flame Retardant ABS Prepared by In-situ Reaction Compatibilization

Effect of DBDPE/Sb2O3 Flame Retardant on the Flame Retardancy and Mechanical Properties of ABS

Preparation and Property of Novel Halogen-free Flame Retardant ABS by P-N Flame Retardant

The effect of adjuvant on the halogen-free intumescent flame retardant ABS/PA6/SMA/APP blend

Study on the Effect of Flame Retardation Based on the Halogen-free Intumescent Flame Retardant for ABS/PA6 Alloy

Application of Non-halogen Flame Retardant to Preparation of Flame-Retardant ABS

Phosphorus-Based Flame-Retardant Acrylonitrile Butadiene Styrene Copolymer with Enhanced Mechanical Properties by Combining Ultrahigh Molecular Weight Silicone Rubber and Ethylene Methyl Acrylate Copolymer