Abstract:The hysteresis of rubber materials due to deformation and viscoelasticity is the main reason for the heat build-up (HBU) and rolling resistance (RR) of the rolling tire. It is important to realize the high precision prediction of HBU and RR of tire for the optimal design of high-performance fuel-saving tire. In this work, a thermo-mechanical coupling method based on Endurica and Abaqus co-simulation was used to predict the steady-state temperature distribution and RR of three finite element models (Lagrangian–Eulerian model, Lagrangian model, and Plane Strain model) of the solid tires under different loads and rotating speeds. The simulation results were compared with the experimental results. The Kraus self-heating model was utilized in the thermo-mechanical coupling method, which realized the quantitative relationship between the dynamic loss modulus of rubber and the loading conditions (temperature, strain, and strain rate). Special attention was paid to the determination of the material parameters in the Kraus self-heating model. The comparison between simulation results and experimental results shows that the Lagrangian model had the highest prediction accuracy, and the average prediction errors of the steady-state surface temperature and RR under three loading conditions were 3.4% and 7.9%, respectively. The Lagrangian–Eulerian model came in the second with average errors of 9.7% and 11.1%, respectively. The Plane Strain model had the worst prediction accuracy, with the average errors of 21.4% and 44.6%, respectively. In terms of the simulation time, the Plane Strain model had the lowest cost, and the average calculation time was 1143 s. The Lagrangian–Eulerian model took the second place, with an average calculation time of 2621 s. The Lagrangian model had the highest computation cost, with an average time of 5597 s. The comparison between the simulation results and the experimental results verified the effectiveness of the thermo-mechanical coupling analysis method. The methods of three finite element models of the solid tires in this work can provide some reference for the optimization design of elastomeric components (Lagrangian model), pneumatic tires (Lagrangian–Eulerian model), and non-pneumatic tires (Plane Strain model).

Development of Direct-pressure Vulcanization Technology for High-performance Tires

Structural design and mechanical analysis of a new equipment for tire vulcanization

Research on simplified tire finite element modeling and simulation method

Tunable Van der Waals interfacial interaction for ultrahigh-damping rubber bends

Study on tire curing at non-isothermal outer temperature

The effect of temperature and vulcanisation time on the thermal and mechanical properties of rubber used in tires

Self-repairable, recyclable and heat-resistant polyurethane for high-performance automobile tires

Static Stiffness Properties of High Load Capacity Non-Pneumatic Tires with Different Tread Structures

Novel Design of Eco-Friendly Super Elastomer Materials With Optimized Hard Segments Micro-Structure: Toward Next-Generation High-Performance Tires

FUNDAMENTAL APPROACH TO PREDICT TIRE AIR PRESSURE LOSS OVER TIME

Steady-State Temperature Field and Rolling Resistance Characteristics of Low-Speed and Low-Load Capacity Non-Pneumatic Tires

Thermal Mechanical Coupling Analysis of a Flexible Spoke Non-pneumatic Tire

Thermal-stress analysis of vulcanization molds to determine the dilatation gap between aluminum segments

Heat Build-Up and Rolling Resistance Analysis of a Solid Tire: Experimental Observation and Numerical Simulation with Thermo-Mechanical Coupling Method

Optimum Preheating Temperature Before Tire Vulcanization

Curing behaviors, mechanical properties, dynamic mechanical analysis and morphologies of natural rubber vulcanizates containing reclaimed rubber

Thermo-Mechanical Coupling Analysis of Inserts Supporting Run-Flat Tires under Zero-Pressure Conditions

Effectiveness of original additives in waste rubbers for revulcanization after reclamation with a low-temperature mechanochemical devulcanization method

Study on key mechanical properties of the flexible spoke non-pneumatic tire considering thermo-mechanical coupling

From Nano to Giant? Designing Carbon Nanotubes for Rubber Reinforcement and Their Applications for High Performance Tires

Building Chemical Interface Layers in Functionalized Graphene Oxide/Rubber Composites to Achieve Enhanced Mechanical Properties and Thermal Control Capability of Tires