The Gas-Solid Flow and Characteristics of Particles Capture by the Wall in an Opposed Multi-Burner Gasifier

Xian-bin LI,Qing-hua GUO,Jie ZHANG,Zheng-hua DAI,Guang-suo YU

DOI: https://doi.org/10.3969/j.issn.1003-9015.2014.05.004

2014-01-01

Abstract:3D numerical simulation was conducted to investigate the gas-solid two phase flows and particle capture characteristics of the wall in an opposed multi-burner gasifier. The Realizable k-εmodel was used to calculate the complex turbulent gas flow, Euler-Lagrange model was used to simulate turbulent gas-solid flows in the gasifier, while stochastic trajectory model was adopted to trace particles trajectories. The simulation results agree with the experimental data of cold model reasonably well, the flow field conforms to the phenomenon of the hot model experimental results, and the average diameter of the particles the gasifier wall captured is consistent with the experimental data of hot model. The results show that the average diameter of particles captured by the wall of gasifier wall presents certain regularity. There are two positions (2.8 m above and 0.2 m below the burner plane) where the average diameter of the particles has local maximums. Above the burner plane, the captured particle diameters decrease as the density of the particles increases. The particle deposition covers the entire lining of gasifier, and with the effect of impacting stream the deposition rate reaches the greatest at positions of 1.8 m above and 1.9 m below the burner plane respectively. Shortening the straight segments above the burner plane affects the flow field in the furnace, the impacting stream restricted by the dome becomes shorten and widen, and makes the average diameter of particles the dome captured and the deposition rate increase.