Experiment of Oil Recovery from Oil-contaminated Soil
HE Zeneng,LI Zhenshan,JI Guodong
DOI: https://doi.org/10.3969/j.issn.1005-0930.2005.02.004
2005-01-01
Abstract:Experiments were conducted to recover the oil from oil-contaminated soil. The artificial oil contaminated soil was confected by using the crude oil of Huabei Oilfield and the typical soil on North China Plain, with analysis of organic component and viscosity of crude oil, and the size distribution of the soil. Triton, peregal, nonylphenol ethoxylate and sodium alkyl benzene sulfonate, based on the qualitative comparison experiments between 10 kinds of surfactants, were selected for further experiments because of their higher efficiency of washing oil. The mixing experiments were conducted according to the Simplex-lattice design. Furthermore, the surfactant formulation was optimized by the neural network model. The results show three optimality surfactant formulation: (i) 3(triton)∶[KG-*2]1(sodium alkyl benzene sulfonate); (ii) 2(triton) ∶[KG-*2]1(peregal)∶[KG-*2]1(sodium alkyl benzene sulfonate); and (iii) 3(triton)∶[KG-*2]1(peregal)∶[KG-*2]2(nonylphenol ethoxylate)∶[KG-*2]4(sodium alkyl benzene sulfonate). In these three kinds of formulation, sodium carbonate and sodium silicate, the concentrations of which were from 30% to 50%, were used for the assistant reagent. The influence of factors such as agitate temperature, agitate time, solid-liquid ratio, agitate intensity and reagent concentration on the efficiency of oil washing were researched. The orthogonal experiment was conducted to optimize the process conditions. The result indicated that when agitate temperature is at 75℃, agitate time 50min, solid liquid ratio 1∶[KG-*2]20, agitate intensity 150r/min, and reagent concentration 0.3g/L, the efficiency of oil washing can be up to 90.15%, and that the oil floated on the surface without obvious emulsification, and was gathered through simple shaving. If the reagent concentration rise to 2.5g/L, the efficiency of oil washing may is beyond 98%.