Abstract:Objective:To prepare the lithium-doped poly-glycerol sebacate (PGS-Li) scaffold using the specific effects of lithium ions and the excellent performance of PGS, and to provide the basis for its application prospects in cementation tissue engineering scaffold.Methods:The scaffolds were divided into two groups.The PGS-Li scaffolds prepared by adding lithium phosphate during the PGS cross-linking process were used as PGS-Li group, and the PGS scaffolds synthesized by the equal-purification of sebacic acid and glycerol were used as PGS group.The molecular weights of the scaffolds in two groups were determined by gel permeation chromatography.The structures of the scaffolds in two groups were analyzed by fourier transform infrared spectroscope.The surface morphology and the porosities and the pore sizes of the scaffolds in two groups were observed by scanning electron microscope.X-ray photoelectron (XPS) spectroscope and inductively coupled plasma optical emission spectrometer were used to determine the Li ion contents in the scaffolds in two groups.Thermogravimetric analyzer was used to analyze the thermal stabilities of the scaffolds in two groups.Contact angle measuring instrument was used to compare the hydrophilicities of the scaffolds in two groups.In vitro weight loss test was used to determine the degradation rates of the scaffolds in two groups.The OCCM-30cells were divided into experimental group (added with PGS-Li scaffold extract) , PGS group (added with PGS scaffold extract) and blank control group (added with DMEM culture medium) .MTT assay was used to detect the proliferation activities of cells in various groups at different time (24, 48and 72h) ;the cell morphology was observed by calcein-AM staining.Results:The gel permeation chromatography results showed that the molecular weight of the PGS-Li scaffold was slightly larger than that of the PGS scaffold.The specific absorption peak of phosphate was detected in the fourier infrared spectrum of the PGS-Li scaffold.The scaffolds in two groups had irregular three-dimensional network structures under scanning electron microscope, and the pore size was 20-160μm, the porosity of PGS scaffold was (53.92±2.18) ％, and the porosity of PGS-Li scaffold was (53.58±1.73) ％, there was no statistical difference between two groups (P＞0.05) .The XPS results showed that a peak appeared at 54.9eV in PGS-Li group, which coincided with the Li 1s binding energy, while the inductively coupled plasma emission spectrometer results showed that the Li ion content in the PGS-Li scaffold was 0.084％.The thermogravimetric analysis results showed that PGS-Li scaffolds began to degrade at a higher temperature and ceased at a lower temperature compared with PGS scaffolds.The contact angle measurement results indicated that both the materials were hydrophilic materials;the contact angle of PGS scaffold meterial was 78.26°±2.00°, and the contact angle of the PGS-Li scaffold material was 69.78°±1.15°;there was statistical difference between two groups (P＜0.05) .The in vitro degradation experiments showed that the degradation rate of PGS-Li scaffolds was faster than that of PGS scaffolds.The proliferation activity of OCCM-30cells in PGS-Li group had no significant difference compared with PGS group and blank control group (P＞0.05) .The calcein-AM staining results showed the green fluorescence in the OCCM-30cells in PGS and PGS-Li groups, and there were no significant changes in the morphology of cementoblasts.Conclusion:PGS-Li scaffolds have similar composition and structure to PGS scaffolds, and have better performance in hydrophilicity and thermal stability.PGS-Li scaffolds have no effect on the proliferation of cementoblasts and have broad application prospects in cementum tissue engineering.

Synthesis and electrospun scaffolds preparation of poly(glycerol sebacate)

Optimized Synthesis of Biodegradable Elastomer PEGylated Poly(glycerol sebacate) and Their Biomedical Application

Porous Poly(glycerol Sebacate) (PGS) Elastomer Scaffolds for Skin Tissue Engineering

Preparation and characterization of a biodegradable poly(sebacic-co-propanetriol) elastomer

Preparation of lithium-doped poly-glycerol sebacate scaffold and its properties

Biodegradable Fibrous Scaffolds Composed Of Gelatin Coated Poly(Epsilon-Caprolactone) Prepared By Coaxial Electrospinning

Electrospun Polylactide/poly(ethylene Glycol) Hybrid Fibrous Scaffolds for Tissue Engineering

Characterization and optimization of glycerol/sebacate ratio in poly(glycerol-sebacate) elastomer for cell culture application.

Highly elastomeric poly(glycerol sebacate)-co-poly(ethylene glycol) amphiphilic block copolymers

Tissue engineering scaffold electrospun from poly(ε-caprolactone)-b- poly(sulfobetaine methacrylate) block copolymers with improved hydrophilicity and good cytocompatibility

Polyglycerol Sebacate Elastomer: A Critical Overview of Synthetic Methods and Characterisation Techniques

Preparation and Properties of a Novel Biodegradable Polyester Elastomer with Functional Groups

Fabrication of poly(l-glutamic acid)/chitosan polyelectrolyte complex porous scaffolds for tissue engineering.

Fabrication of Multilayered Electrospun Poly(lactic-Co-glycolic Acid)/polyvinyl Pyrrolidone Plus Poly(ethylene Oxide) Scaffolds and Biocompatibility Evaluation

Electrospun Poly(lactide-co-glycolide-co-3(S)-methyl-morpholine-2,5-dione) Nanofibrous Scaffolds for Tissue Engineering

Evaluation Of Electrospun Fibrous Scaffolds Of Poly(Dl-Lactide) And Poly(Ethylene Glycol) For Skin Tissue Engineering

A Poly(glycerol Sebacate) Based Photo/thermo Dual Curable Biodegradable and Biocompatible Polymer for Biomedical Applications

Composition and crystallization property of biodegradable poly-(sebacic-co- propanetriol) elastomer

[Synthesis, Characterization and Electrospinning of Biodegradable Polyurethanes Based on Poly(epsilon-Caprolactone) and L-lysine Diisocynate].

Preparation And Characterization Of Cs/Pcl Vascular Scaffolds By Electrospinning

Fabrication and Characterization of Gelatin/Polyvinyl Alcohol Composite Scaffold